VW ID. Buzz Option Audio SET-415 Plug & Play Amp & Subwoofer
Sound system for VW ID. Buzz (1st gen.) | DSP power amplifier + subwoofer + front speakers
The V2 delivers significantly greater volume, clarity and control, whilst also improving sound resolution in the front of the vehicle. The OPTION DSP-6.2 amplifies the music signal and fine-tunes time alignment, equalisation and frequency distribution to suit the VW ID. Buzz and the retrofitted OPTION front speakers.
The new front speakers deliver a fresher, more detailed and more pleasant sound than the factory-fitted speakers. The treble in particular remains brilliant even at higher volumes, without becoming tiring on long journeys. The original rear speakers remain in the vehicle for the time being with the V2.
The OPTION ROCK-5 enhances the sound with a more powerful, deeper and fuller bass. The compact 20-cm subwoofer is concealed in the cavity beneath the front passenger seat and fires downwards. This preserves the boot and usable storage space.
Technical Data
| Amplifier | Highly efficient 6-channel amplifier with Class GD technology |
|---|---|
| DSP | Integrated 8-channel DSP processor with 358 kHz |
| Multi-channel power output | 6 × 60 watts RMS at 4 ohms |
| Power with mono subwoofer output | 4 × 60 watts RMS into 4 ohms + 1 × 120 watts RMS into 2 ohms |
| Channels | 5 and 6 are combined for the mono subwoofer output |
| Minimum impedance for stereo channels | 3 ohms |
| Minimum impedance in mono mode | 2 ohms |
| High-level input | 4 channels with automatic switch-on and switch-off via Auto Sense |
| Frequency response | 20 Hz to 21 kHz |
| Operating voltage | 10.3 to 17.5 volts |
| Standby quiescent current | 0.6 mA |
| Setup 1 | original speakers |
| Setup 2 | Retrofit OPTION speakers |
| Dimensions | without mounting bracket 94 × 149 × 32 mm |
| Dimensions | with mounting bracket 118 × 149 × 32 mm |
| Design | Passive 20-cm subwoofer in a sealed enclosure |
| Diaphragm diameter | 20 cm (8 inches) |
| Power handling | 200 watts RMS |
| Impedance | 2 ohms |
| Magnet | ferrite |
| Dimensions | 36 × 22.4 × 13 cm |
| Connections | Molex plug and push terminals |
| Phase switchable | 0° or 180° via jumper |
| Speaker system | 2-way component system |
| Low-midrange driver diameter | 16.5 cm |
| RMS power | 70 watts |
| Impedance | 3 ohms |
| Sensitivity | 91 dB |
| Tweeter | 25 mm silk dome tweeter |
| High-frequency adjustment | 3 dB attenuation by disconnecting the yellow cable loop |
What's Included:
- 1 × OPTION DSP-6.2 6-channel amplifier
- 1 × 051.024-3 Plug & Play T-cable set, Powerquadlock
- 1 × 052.003-3 Plug & Play subwoofer cable, 3 metres
- 1 × Remote control for subwoofer level adjustment
- Vehicle-specific, pre-programmed DSP setup for original speakers and retrofitted OPTION speakers
- 1 × OPTION ROCK-5 20cm subwoofer in a sealed enclosure
- 1 × Molex plug with open ends for universal connection (not required here)
- 1 × Molex plug loop (not required here)
- 1 x pair of OPTION V-165 2-way component speakers (including mounting rivets)
- 1 × Torx set
- 1 × removal tool
- 1 × riveting pliers
