VW ID. Buzz Option Audio SET-414 Plug & Play Amp & Subwoofer
Sound system for the VW ID. Buzz (1st generation) | DSP power amplifier + subwoofer
The V1 already delivers significantly greater volume, clarity and control using the original VW speakers. The OPTION DSP-6.2 amplifies the music signal and specifically tunes time alignment, equalisation and frequency distribution to the VW ID. Buzz and its factory-fitted speakers.
The additional OPTION ROCK-5 enhances the sound with a more powerful, deeper and fuller bass. The compact 20-cm subwoofer is concealed in the cavity beneath the front passenger seat and fires downwards. This allows the bass to be distributed evenly throughout the vehicle without compromising boot space or usable storage space.
The V1 is ideal if you don’t want to replace the speakers straight away. The vehicle-specific setup is already stored in the power amplifier and configured for the original front and rear speakers. The speakers can still be replaced with OPTION speakers at a later date.
The vehicle-specific T-cable set is connected to the radio unit and transmits both the music signal and the power supply. This means there is no need to run a separate power cable to the battery.
Specification:
| Amplifier | highly efficient 6-channel amplifier with Class GD technology |
|---|---|
| DSP | integrated 8-channel DSP processor with 358 kHz |
| Multi-channel power output | 6 × 60 watts RMS at 4 ohms |
| Power with mono subwoofer output | 4 × 60 watts RMS into 4 ohms + 1 × 120 watts RMS into 2 ohms |
| Channels | 5 and 6 are combined for the mono subwoofer output |
| Minimum impedance for stereo channels | 3 ohms |
| Minimum impedance in mono mode | 2 ohms |
| High-level input | 4 channels with automatic switch-on and switch-off via Auto Sense |
| Frequency response | 20 Hz to 21 kHz |
| Operating voltage | 10.3 to 17.5 volts |
| Standby quiescent current | 0.6 mA |
| Setup 1 | original speakers |
| Setup 2 | Retrofit OPTION speakers |
| Dimensions | without mounting bracket 94 × 149 × 32 mm |
| Dimensions | with mounting bracket 118 × 149 × 32 mm |
| Design | Passive 20-cm subwoofer in a sealed enclosure |
| Diaphragm diameter | 20 cm (8 inches) |
| Power handling | 200 watts RMS |
| Impedance | 2 ohms |
| Magnet | ferrite |
| Dimensions | 36 × 22.4 × 13 cm |
| Connections | Molex plug and push terminals |
| Phase switchable | 0° or 180° via jumper |
What's Included:
- 1 × OPTION DSP-6.2 6-channel amplifier
- 1 × 051.024-3 Plug & Play T-cable set, Powerquadlock
- 1 × 052.003-3 Plug & Play subwoofer cable, 3 metres
- 1 × Remote control for subwoofer level adjustment
- 1 × Insulating tape
- Vehicle-specific, pre-programmed DSP setup for original speakers and retrofitted OPTION speakers
- 1 × OPTION ROCK-5 20cm subwoofer in a sealed enclosure
- 1 × Molex plug with open ends for universal connection (not required here)
- 1 × Molex plug loop (not required here)
