Rockford Fosgate P500X2 - 500W RMS Punch Series 2-Channel Class AB Amplifier

Big power for your speakers or sub

Rockford Fosgate's Punch P500X2 amplifier sends 150 watts RMS per channel to your speakers, filling your ride with clean music. You can use the high-pass filter to keep the low bass out of your speakers so they perform more efficiently. You can also switch this versatile amp into mono mode to drive a subwoofer with up to 300 watts RMS, then use the built-in low-pass filter to send the correct bass frequencies to your sub. The Punch EQ2 features bass and treble boosts, in case you want to add a little boom or sizzle back into the mix.

Easy to set for optimum performance

P300X2 control panel

Once again, Rockford Fosgate steps away from the crowd with their C.L.E.A.N. technology (Calibrated Level Eliminates Audible Noise) — a setup system that ensures your music will sound as clean and powerful as possible. It works like this: first download the setup tones from Rockford Fosgate, then play the tone, adjust the receiver volume until a red clip light on the amp goes out, then turn the amp gain up until a blue light comes on. It's that simple — your amplifier will be perfectly set to match your receiver's output. When your receiver reaches maximum clean volume, you'll get maximum clean power from your Power amp. At quiet listening levels, you'll hear less background noise and more of your music.

Keeps an eye on things while playing

If that blue light turns solid red while you're playing music, the amp's telling you that your source is distorting and you should turn it down, or risk damage to your gear. The optional PLC2 remote level control also doubles as a clip indicator, so you can see from the front seat if your music's clipping. The amp's built-in computer keeps tabs on the output current, ensuring that plunging speaker impedances (they change during play) or even a short circuit won't hurt anything.

Maintaining coolness raises efficiency and lowers distortion

Rockford Fosgate's Dynamic Thermal Management system uses forced air to dissipate heat evenly across the amp and out through the high-mass heatsink, efficiently drawing heat away from vital internal parts. Their proprietary MEHSA cooling process maximizes the heat transfer from the MOSFET devices to the heatsink, allowing the heat to escape more readily, so the transistors stay cooler and work better.

                              P500X2 connection panel and input clip light

Product Features:

• Punch Series 2-Channel Class AB Car Amplifier
• RMS Power Rating:
  • 4 ohms: 150 watts x 2 channel
  • 2 ohms: 250 watts x 2 channel
  • Bridged: 500 watts x 1 channel @ 4 ohms
• MOSFET power supply
• Total RMS power output: 500 watts
• LED Power/Protect Light
• Wired bass level remote control with optional Rockford Fosgate PLC2
• 1 pair of pre-amp outputs
• Signal sensing remote turn-on
• C.L.E.A.N. gain setup system
• Dynamic Thermal Management and MEHSA MOSFET cooling systems
• MOSFET power and output stages
• CEA-2006 compliant
• Input sensitivity: .15 - 12 volts
• Frequency Response: 20 - 20000 Hz
• Total Harmonic Distortion (THD): <1%
• Signal to Noise Ratio: 85 dB
• Variable high-pass filter: 50 - 250 Hz
• Variable low-pass filter: 50 - 250 Hz
• Variable Bass Boost: 0 - 18 dB
• Fuse Rating: 80A
• 4 AWG gauge amplifier wiring kit is recommended for installation
• Dimensions: 13-3/8" L x 8-13/16" W x 2-7/16" H
• Authorised UK online retailer
• Full Manufactures Warranty
• Next-day Delivery Available

What's in the box: