Getting a strong clean signal from a factory stereo
Your aftermarket processors and amplifiers need clean and robust line-level input signals, especially when getting them from a factory radio's speaker outputs. Wāvtech's link2 line output converter can produce up to 10 volts of output — plenty enough for your aftermarket gear to work with.
Works with factory amps too
Those speaker-level inputs can handle up to 40 volts, the equivalent of 400 watts, so you can use one in a premium system with a factory amplifier. This way, you retain all your vehicle's factory audio options and warnings. The link2's gain control and clip light help you keep the signal level under control and distortion-free control and distortion-free.
Product Features:
-
2-Channel Line Output Converter (LOC)
-
Differential Balanced Inputs
-
Low Impedance Outputs
-
Variable Gain Adjustments w/Clip LEDs
-
Auto-Turn On via DC-Offset or Audio Signal Detect
-
Generated +12V Remote Output
-
OEM Load Detect Compatible
-
Locking Detachable Power/Speaker Terminals
-
Professional Grade Panel Mount RCA’s
-
Compact Aluminum Chassis w/Detachable Mounting Tabs
link2 Specifications
-
Output Voltage (Max) ----------- >10Vrms
-
Output Impedance ---------------- <50Ω
-
Input Sensitivity -------------------- 2-20Vrms, 4-40Vrms
-
Max Input Voltage ----------------- 40Vrms
-
Frequency Response ------------- <10 Hz to >100kHz
-
THD+N SPK -------------------------- <0.01%
-
S/N SPK ------------------------------- >110dBA
-
Turn-On Trigger -------------------- +12V, DC-offset & Audio Detect
-
Generated +12V Output -------- >500mA
-
Chassis Dimensions --------------- 1.1”x2.9”x2.5” (29x75x63mm)
What's in the box:
- 2-Channel line output converter
- 2 Phoenix terminals (installed)
- 2 Mounting tabs (installed)
- Two ½" Screws
- Ground ring terminal
- Owner's manual
Price | £69.99 |
---|---|
Manufacturer | Wavtech |
Vehicle Manufacturer | None |