VW Transporter T5 2006-2009 RCD200 single or double DIN Car Stereo Wiring ISO & Aerial Fitting Kit

Volkswagen Stereo Replacement Kit allows the fitment of a single or double DIN aftermarket head unit to the selected vehicle. This kit includes a Wiring Harness, Aerial Adaptor and Stereo removal keys.

Package Includes

• Wiring Harness Adaptor (non-amplified systems only)
• Stereo Removal Keys

There is an Aerial Adaptor also included with the Wiring Adaptor.

Wiring Harness

The wiring harness will allow the installation of the stereo.
Note: You will need to connect the red wire to the ignition supply in the fuse box. 

Stereo Removal Keys

Stereo Removal Keys to remove the headunit from the fascia cage. Many OEM manufacturers are incorporating special locking mechanisms into their head units in an attempt to prevent stereo theft. This means that to remove one of these units you will require a manufacturer-specific stereo removal key to prevent damage to the head unit or the surrounding fascia and cage.

Please Note

• Red wire has to be connected to a separate ignition feed in the vehicle to make the aftermarket head unit power up
• Orange cable requires connection to illumination wire but only if the radio requires this for dimming purposes at night.
• Blue wire needs to be connected to the Remote Antenna or ignition supply wire (if rem ant wire not available) on the back of car stereo.

Please Note

• When connected, your new stereo may not power up, and this is no fault of the wiring harness purchased.
• Audi / VW / Skoda / Fiat and other vehicles tend not to have an ignition switch live feed.
• In these cases, it is necessary to manually connect a spurred live feed from the fuse box, for example, to feed switched power so the new stereo turns on and off with the key.
• The wire in particular, on the new wiring harness will be the red wire.