Vauxhall, Opel, Holden (Pre 2006/ ISO) Double DIN car stereo fitting kit (MATT BLACK/ WITH SWC) FK-700-ISO-SWC

PLEASE NOTE

Check your car and the original radio fitted before ordering, if in doubt remove the original radio. The main radio connections on compatible cars will be two 8 pin connectors. Cars that are not compatible with have one big quad lock connector with a lever to remove from the back of the radio. Later cars with the quad lock connector require this CANBUS steering wheel control interface.

For vehicles without steering wheel controls please use FK-700-ISO

Compatibility

Check your car and the original radio fitted before ordering, if in doubt remove the original radio. The main radio connections on compatible cars will be two 8 pin connectors. Cars that are not compatible with have one big quad lock connector with a lever to remove from the back of the radio

ISO to DIN Antenna adapter (21-100)

Antenna adapter cable for European cars that have an ISO original style antenna cable. This cable converts the cars existing ISO aerial plug to an aftermarket DIN type used by Clarion, JVC, Pioneer, Sony and other Japanese, Chinese and American radio manufacturers.

Vauxhall, Opel, Holden steering wheel control interface (29-609)

Car radio ISO cable and steering wheel control interface, allowing you to connect an aftermarket car stereo by adapting the original radio connector behind the factory radio to European ISO standard, as well as retaining the vehicles factory steering wheel audio controls. This cable swaps the ignition and +12v memory power supply needed for Vauxhall cars. Suitable for multiple Vauxhall, Opel and Holden vehicles which have ISO connections for the radios on the back of the original radio. Check your car and the original radio fitted before ordering, if in doubt remove the original radio. The main radio connections on compatible cars will be two 8 pin connectors.

PLEASE NOTE: For vehicles without steering wheel controls please use FK-700-ISO

29-Series Universal patch lead (29-025)

Universal patch lead to be used with In car Tec 29- series steering wheel control interfaces. This cable plugs into the 29-Series control box and connects to the 3.5mm socket or single wire on the back of the new head-unit.

Suitable for Use with Alpine, Clarion, JVC, Kenwood, Pioneer, Sony, Zenec, Philips, Dynavin and non branded Chinese head units.

Double DIN Matt Black car radio fascia adapter and cage kit (50-165 + 51-012)

Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket version

This fascia adapter allows the fitting of an aftermarket radio into the dashboard of the car by matching the shape, style, size and colour of the original OEM factory-fitted radio.

An additional 103mm cage is included with this kit, this cage kit is designed to replace the metal cage kit that is usually supplied with your new aftermarket double din head unit or navigation system. It is used along with fascias that have 103mm high hole sizes. Complete with fixings to attach to the new car radio body.

COLOUR: MATT BLACK / ANTHRACITE

Vauxhall/ Opel radio release keys (52-012)

Standard two prong radio (Double DIN) release keys used on Blaupunkt, VDO, Philips style radios.