Toyota Alphard, Hiace, Hilux, IQ, RAV4, Urban Cruiser Double DIN car stereo upgrade fitting kit with Steering Wheel Controls FK-282

Complete fitting kit to install a Double DIN aftermarket car stereo head unit and retain use of the original steering wheel controls in various Toyota Vehicle models.

Compatible with the following vehicles:

This head unit fitting kit includes:

Steering control interface (29-648)

Car Audio Steering wheel interface allowing use of original buttons with a new aftermarket head-unit. The cable adapts from the original connectors in the car to standard aftermarket ISO connectors. This replaces the need for a separate ISO radio replacement adapter cable.

Universal SWC patch lead (29-025)

Universal patch lead to be used with In car Tec 29- series steering wheel control interfaces. This cable plugs into the 29-Series control box and connects to the 3.5mm socket or single wire on the back of the new head-unit.

Suitable for Use with Alpine, Clarion, JVC, Kenwood, Pioneer, Sony, Zenec, Philips, Dynavin and non branded Chinese head units.

Toyota Double DIN fascia brackets (50-282)

Car radio fascia adapter panel to allow the fitting of an aftermarket Double DIN car radio upgrade.

The fascia adaptor allows the fitting of an aftermarket radio into the dashboard by matching the shape, style and colour of the original radio.

These two side fixing brackets bolt directly on to the new stereo, use the original metal brackets in the car to mount the new stereo.

The fascia is designed to fit various Toyota cars.

For Single DIN fitting use an additional Toyota pocket.

PLEASE NOTE: There is a very slight gap above the new radio after using this kit