Rockford Fosgate R2-750X5 New Prime Series 750W 5-channel Amplifier

Give your system the power it deserves

Rockford Fosgate's Prime Series R2-750X5 5-channel amp can drive 4 speakers with 50 watts RMS each while powering a subwoofer with up to 350 watts RMS. Not worried about your rear speakers? You can bridge the amp to 3-channel mode to drive a pair of high-performance components with 200 watts RMS each, while still sending that 350 watts to a sub. You can use the high- and low-pass filters, a subsonic filter, and Rockford Fosgate's famous Punch boost to get maximum performance from your speakers and sub.

Setting it up for optimum performance

Rockford Fosgate's C.L.E.A.N. technology (Calibrated Level Eliminates Audible Noise) setup system ensures your music will sound as clean and powerful as possible. It's a simple system to use — turn it up until the light shows red, then turn it down until the red light goes out. Speaker-level inputs let you hook this amp up to almost any system, even a factory stereo.

CEA-2006 Compliant
Power ratings on Rockford Fosgate amplifiers conform to the CEA-2006 industry standards. These guidelines mean your amplifier's output power ratings are REAL POWER numbers, not inflated marketing ratings.

Full Range Class-D
A full-range version of the Class-D topology which is a high-efficiency amplifier design that reduces current consumption from the charging system.

P.O.W.E.R.
Power supply circuit design that allows the amplifier to increase output power as voltage increases.

C.L.E.A.N. Set-Up
C.L.E.A.N. (Calibrated Level Eliminates Audible Noise) is a patented circuit with in/out clip LEDs to help match a source to the amp and optimise output.

Balanced Differential Inputs
Differential inputs eliminate noise picked up by signal cables.

MEHSA 4 (Maximum Efficiency Heat Sink Application)
MEHSA4 reduces MOSFET temperatures, lowers distortion, increases durability and prolongs the output device life span.

NOMAD
NOMAD is a "real-time" analog computer that protects your amplifier from shorting speaker wires and dangerously low speaker impedances.

CE Compliant
This product fulfills all essential safety and environmental requirements as defined in the European Directives (768/2008 EC).

Rollback Protection
During demanding musical conditions, the amplifier can dynamically reduce demand to prevent stress on the output devices.

Product Features:

• CEA-2006 Power Rating 50W x 4 + 200W x 1 @ 4Ω ≤1.0% THD+N
• Number of Channels 5
• Total Power (Sum of Rated Power) 750 Watts
• Rated Power (RMS Continuous Power)
  • • 50 Watts x 4 + 200 Watts x 1 @ 4Ω
    • 100 Watts x 4 + 350 Watts x 1 @ 2Ω
    • 200 Watts x 2 + N/A @ 4Ω Bridged/Mono
• Dynamic Power (PVC/PowerCube®)
  • • 70 Watts x 4 + 241 Watts x 1 @ 4Ω
    • 114 Watts x 4 + 426 Watts x 1 @ 2Ω
    • 234 Watts x 2 + N/A @ 4Ω Bridged/Mono
• Bridgeable Yes
• Frequency Response20 Hz - 20 kHz
• Input Sensitivity
  • • Low-Level: 150 mV - 4 V
    • High-Level: 450 mV - 12 V
• Circuit Topology Class D
• Efficiency (average)
• Total Harmonic Distortion (THD+Noise)
  • • Front/Rear 4Ω: <1.0%
    • Front/Rear 2Ω: <1.0%
    • Sub 4Ω: <1.0%
    • Sub 2Ω: <1.0%
• Signal Input
  • • Front Low-Level: 2 RCA
    • Front High-Level: 4-Pin Molex
    • Rear Low-Level: 2 RCA
    • Rear High-Level: 4-Pin Molex
    • Sub Low-Level: 2 RCA
    • Sub High-Level: 4-Pin Molex
    • Input Switch: 2/4/5 Input (works for RCA/Hi-Level inputs)
• Signal Output N/A
• Tone Controls 0 to +18 dB @ 45 Hz
• Crossover Controls
• Front High-Pass: 50 Hz - 250 Hz @ 12dB/Octave Butterworth
• Front Low-Pass: 50 Hz - 250 Hz @ 12dB/Octave Butterworth
• Rear High-Pass: 50 Hz - 250 Hz @ 12dB/Octave Butterworth
• Rear Low-Pass: 50 Hz - 250 Hz @ 12dB/Octave Butterworth
• Sub Low-Pass: 50 Hz - 250 Hz @ 12dB/Octave Butterworth
• Sub Infrasonic: 15 Hz - 40 Hz @ 12dB/Octave Butterworth
• Authorised Internet Dealer
• Full Manufacturer's Warranty
• Next-day Delivery Available

What's in the box: