Rockford Fosgate R2-500X1 New Prime Series 500W Monoblock Amplifier with Bass Remote

Give your sub the power it deserves

Rockford Fosgate's Prime Series R2-500X1 amplifier can power your subwoofer with up to 500 watts RMS. You can adjust the low-pass filter, infrasonic filter, and Rockford Fosgate's famous Punch boost to get the best possible bass from the sub and enclosure in your vehicle. 

Setting it up for optimum performance

Rockford Fosgate's C.L.E.A.N. technology (Calibrated Level Eliminates Audible Noise) setup system ensures your bass will sound as clean and powerful as possible. It's a simple system to use — turn it up until the light shows red, then turn it down until the red light goes out. Speaker-level inputs let you hook this amp up to almost any system, even a factory stereo.

Technologies

CEA-2006 Compliant
Power ratings on Rockford Fosgate amplifiers conform to the CEA-2006 industry standards. These guidelines mean your amplifier's output power ratings are REAL POWER numbers, not inflated marketing ratings.

Class-D
High-efficiency amplifier design that reduces current consumption from the charging system.

P.O.W.E.R.
Power supply circuit design that allows the amplifier to increase output power as voltage increases.

C.L.E.A.N. Set-Up
C.L.E.A.N. (Calibrated Level Eliminates Audible Noise) is a patented circuit with in/out clip LEDs to help match a source to the amp and optimise output.

Balanced Differential Inputs
Differential inputs eliminate noise picked up by signal cables.

MEHSA 4 (Maximum Efficiency Heat Sink Application)
MEHSA4 reduces MOSFET temperatures, lowers distortion, increases durability and prolongs the output device life span.

NOMAD
NOMAD is a "real-time" analog computer that protects your amplifier from shorting speaker wires and dangerously low speaker impedances.

Rollback Protection
During demanding musical conditions, the amplifier can dynamically reduce demand to prevent stress on the output devices.

CE Compliant
This product fulfills all essential safety and environmental requirements as defined in the European Directives (768/2008 EC).

Product Features:

• Prime R2 Series Class D 2 ohms Stable Monoblock Amplifier
• RMS Power Rating:
• 4 ohms: 300 watts x 1 channel
• 2 ohms: 500 watts x 1 channel
• Total RMS power output: 500 watts
• CEA-2006 Compliant Amplifier
• Pulse Width Modulated MOSFET power supply
• LED Power/Protect Light
• Features C.L.E.A.N. Set-up
• Cast aluminum heat sink
• Top mounted control panel
• Wired remote bass level control included
• Soft start turn-on
• Speaker-level (high-level) inputs
• 3-way protection circuitry (thermal, overload, and speaker short protection)
• Input sensitivity:
• Low level: 150mV - 4 volts
• Frequency Response: 20 - 250 Hz
• Total Harmonic Distortion (THD): 1%
• Variable low-pass filter: 50 - 250 Hz
• Subsonic filter: 15 - 40 Hz
• Variable Bass Boost: 0 - 18 dB
• Fuse Rating: 80A
• 4 AWG gauge power and ground wiring is recommended for installation.
• Dimensions: 6.8" W x 8.5" L x 1.9" H
• UK Authorised Internet Dealer
• Full Manufacturer's Warranty

What's in the box: