Package Consists of:
- Rockford P1S2-15 - 15" 15" Subwoofer 500 Watts 2-Ohm
- 15" Box Enclosure
-
8 Gauge Wiring Kit
ROCKFORD-FOSGATE R2-250X1 Amplifier
- CEA-2006 Power Rating 160W x 1 @ 4Ω ≤1.0% THD+N
- Number of Channels 1
- Total Power (Sum of Rated Power) 250 Watts
- Rated Power (RMS Continuous Power)
- 160 Watts x 1 @ 4Ω
- 250 Watts x 1 @ 2Ω
- Dynamic Powe (PVC/PowerCube®)
- Frequency Response 20 Hz - 250 Hz
- Input Sensitivity
- Low-Level: 150 mV - 4 V
- High-Level: 450 mV - 12 V
- Circuit Topology Class D
- Total Harmonic Distortion (THD+Noise)
- 4Ω: <1.0%
- 2Ω: <1.0%
- Signal Input
- Low-Level: 2 RCA
- High-Level: 4-Pin Molex
- Signal Output
- Low-Level: 2 RCA (Pass-Thru active with RCA or Hi-Level input)
- Tone Controls 0 to +18 dB @ 45 Hz
- Crossover Controls
- Low-Pass: 50 Hz - 250 Hz @ 12dB/Octave Butterworth
- Infrasonic: 15 Hz - 40 Hz @ 12dB/Octave Butterworth
- Visual Indicators
- Power/Protect
- C.L.E.A.N. In
- C.L.E.A.N. Out
- Power Wire Gauge 4 AWG
- Power Input Connector Compression Terminal Block
- Speaker Wire Gauge 8 AWG
- Speaker Output Connector Compression Terminal Block
- Cooling Convection
- Operating Voltage 9 - 16 VDC
- Recommended Fuse (not included) 50 A
- Average Current Draw (13.8V Music)
- Max. Current Draw (13.8V Sinewave)
- Dimensions (H x W x D)1.9" x 6.8" x 8.1" (4.9 cm x 17.3 cm x 20.5 cm)
- Authorised Internet Dealer
- 1-year Manufacturer's Warranty
Rockford P1S2-15 - 15" 15" Subwoofer 500 Watts 2-Ohm
- 15" Single 2 Ohm Punch Series Stage 1 Subwoofer
- Power Handling:
- Peak: 500 watts
- RMS: 250 watts
- Impedance: Single 2 ohm
- Kevlar reinforced paper cone and dust cap provides durability
- High-density NBR half-roll surround for an enhanced excursion
- 10 AWG nickel-plated compression input push terminal assembly keeps connection secure
- Tear and fatigue resistant poly-cotton spider will hold up against high amounts of excursion
- High temperature 2" 4-layer voice coil with spun laced Nomex insulating reinforcement collar
- Optimized motor magnetics with extended pole piece and bumped backplate
- Multi-point high-temperature/high-strength neck joint bonding technique for a cleaner bass output
- High quality 16 gauge compound bend frame geometry adds to the sturdy construction
- Semi-flexible PVC removable protective motor cover helps keep motor clean and dust-free
- Proprietary spider venting/cooling technique helps keep subwoofer operating at a safe temperature
- Decorative ABS trim ring for an attractive appearance
- Frequency Response: 18-250 Hz
- Sensitivity: 87 dB
- Xmax: 9mm
- Cutout dimensions: 14.96"
- Mounting Depth: 7"
Price | £499.99 |
---|---|
Manufacturer | Rockford Fosgate |
Vehicle Manufacturer | None |
Write Your Own Review