Rockford Fosgate Punch P1000X5 - 5/4/1 Channel Amplifier 1000 Watts

Big power for your whole system

Rockford Fosgate's Punch P1000X5 amplifier can power your entire system, delivering 75 watts RMS to each of your front and rear speakers, along with up to 500 watts RMS to a subwoofer. The sub channel's low-pass and subsonic filters come in handy for getting the right sound from your sub/enclosure combo, and you can use the amp's high-pass filters to remove the bass from your full-range speakers so they'll play more efficiently. The Punch EQ2 includes bass and treble boosts if you want to liven up the mix.

Are you not worried about the rear speakers? You can also switch this amp into 3-channel mode to drive a couple of high-performance components with 250 watts RMS each while still powering a sub with up to 500 watts.

Easy to set for optimum performance

P300X2 control panel shown as an example

Once again, Rockford Fosgate steps away from the crowd with their C.L.E.A.N. technology (Calibrated Level Eliminates Audible Noise). This setup system ensures your music will sound as clean and powerful as possible. It works like this: first download the setup tones from Rockford Fosgate, then play the tone, adjust the receiver volume until a red clip light on the amp goes out, then turn the amp gain up until a blue light comes on. It's that simple — your amplifier will be perfectly set to match your receiver's output. When your receiver reaches maximum clean volume, you'll get maximum clean power from your Power amp. At quiet listening levels, you'll hear less background noise and more of your music.

Keeps an eye on things while playing

If that blue light turns solid red while you're playing music, the amp's telling you that your source is distorting and you should turn it down, or risk damage to your gear. The optional PLC2 remote level control also doubles as a clip indicator, so you can see from the front seat if your music's clipping. The amp's built-in computer keeps tabs on the output current, ensuring that plunging speaker impedances (they change during play) or even a short circuit won't hurt anything.

Eliminating heat raises efficiency and lowers distortion

Rockford Fosgate's Dynamic Thermal Management system uses forced air to dissipate heat evenly across the amp and out through the high-mass heatsink, efficiently drawing heat away from vital internal parts. Their proprietary MEHSA cooling process maximizes the heat transfer from the MOSFET devices to the heatsink, allowing the heat to escape more readily, so the transistors stay cooler and work better.

                                                            P1000X5 control panel and input clip light

Product Features:

• Punch Series Class AB / BD 2 ohms Stable 5-Channel Amplifier
• RMS Power Rating:
• Total Peak power output:
• 4 ohms: 75 watts x 4 channel + 150 watts x 1 channel
• 2 ohms: 125 watts x 4 channel + 300 watts x 1 channel
• Bridged: 250 watts x 2 channel @ 4 ohms + 300 watts x 1 channel @ 2 ohms
• Total RMS power output: 1000 watts
• LED Power/Protect Light
• Wired bass level remote control with optional Rockford Fosgate PLC2
• Speaker-level (high-level) inputs (Requires adapter like the Kicker KISL)
• Signal sensing remote turn-on
• C.L.E.A.N. gain setup system
• Dynamic Thermal Management and MEHSA MOSFET cooling systems
• MOSFET power and output stages
• CEA-2006 compliant
• Input sensitivity: .15 - 12 volts
• Frequency Response: 20 - 20000 Hz
• Total Harmonic Distortion (THD): <1%
• Signal to Noise Ratio: 85 dB
• Variable high-pass filter: 50 - 250 Hz
• Variable low-pass filter: 50 - 250 Hz
• Subsonic filter: fixed 28Hz @ 12dB/Octave
• Variable Bass Boost: 0 - 18 dB
• Fuse Rating: 150A
• 4 AWG gauge amplifier wiring kit is recommended for installation
• Dimensions: 15-1/8" L x 8-13/16" W x 2-7/16" H
• Authorised Internet Dealer
• Full Manufacturer's Warranty
• Next-day Delivery Available

What's in the box: