Tiny giant
You won't believe how small and powerful this amp is. Rockford Fosgate's PBR300X2 2-channel amp puts out 100 watts RMS each to a pair of speakers, all from an amp you can easily hold in one hand. You can also put this amp in one-channel mode to drive a sub with 300 watts RMS of bumping bass. And an optional wired remote control lets you add Rockford Fosgate's famous extra Punch from the front seat.
Boosted Rail (BR) amp technology
This Punch Class BR amplifier uses Boosted Rail (BR) amp technology to generate so much power from such a tiny case, with capacitors and high-speed circuitry that boost the amp's power supply voltage when needed, so it can handle musical peaks without missing a beat. Rockford Fosgate uses this new technology to create a remarkable amp that fits almost anywhere and delivers powerful sound.
Heat management
The amp also features speaker-level inputs with signal-sensing turn-on, allowing you to connect into almost any system without having to run a turn-on lead back to the receiver. An extruded aluminum heat sink combines with Rockford Fosgate's heat management technology to make sure your tunes keep rockin' — even when you're playing loud.
Product Features:
- Punch Series BR Monoblock Car Amplifier
- RMS Power Rating:
- 4 ohms: 100 watts x 2 chan.
- 2 ohms: 150 watts x 2 chan.
- 4 ohm Bridged: 300 watts x 1 chan.
- Features Rockford Fosgate's Class-BR Topology
- CEA-2006 compliant amplifier
- Ultra-compact chassis
- MOSFET output stage
- Boosted Rail amp technology
- Convection cooling design
- Extruded aluminum heat sink
- Low-level RCA input connection
- High-level speaker input connection
- Detachable Compression Terminals
- 12dB / Octave Butterworth crossover
- Selectable crossover mode: LP/AP/HP
- LED power (blue) and protect (red) indicators
- Variable 4-6 volt hi level DC offset voltage input turn-on control
- Features MEHSA3 (Maximum Efficiency Heat Sink Application - gen. 3)
- Perfect for smaller stealth installations
- Great for motorcycles and recreational vehicles
- Optional Remote Punch EQ provides 0dB to +18dB @ 45Hz
- 16 Gauge speaker wire output terminals
- 10 gauge OFC power and ground wiring is recommended for installation.
- Authorised UK Internet Dealer
- Full Manufacturer's Warranty
- Next-day Delivery Available
Amplifier Specifications:
- Input sensitivity:
- Low level: 150mV - 4V
- High level: 400mV - 11V
- Operating voltage: 9 - 16 VDC
- Recommended fuse rating: 50 A x 1
(not included) - Max. current draw (13.8V Sinewave): 45 A
- Average current draw (13.8V Music): 23 A
- Frequency response: 20 - 20,000 Hz, +/- 3 dB
- Total harmonic distortion: <1.0%
- Signal to Noise Ratio: ≥100 dB
- CMRR: >55 dB @ 1 kHz
- Damping Factor: >200
- High-Pass: 50Hz - 500Hz @ 12dB/Octave
- Low-Pass: 50Hz - 500Hz @ 12dB/Octave
- CEA-2006 Power Rating: 100W x 2 @ 4Ω ≤1.0% THD+N
- Weight: 2.76 lbs
- Dimensions: 6.75"L x 4.25"W x 1.53"H
What's in the box:
- 2-Channel amplifier
- 6" Speaker output harness (Molex plug on one end and tinned bare wire on the other)
- 12" Input harness (Molex plug on one end and female stereo RCA jacks on the other)
- Installation & Operation manual (Eng/ Fren/ Span/ Ger/ Ita)
- Amplifier Performance Verification Certificate
Price | £279.99 |
---|---|
Manufacturer | Rockford Fosgate |
Vehicle Manufacturer | None |