Package Consists of:
-
Rockford Fosgate P1-1X12 -12" - Punch P1 12" ported enclosed subwoofer
-
8 Gauge Wiring Kit.
Rockford Fosgate P300X1 - 300W RMS Punch Series Amplifier
- Number of Channels 1
- Rated Power (RMS Continuous Power):
- 200 Watts x 1 @ 4-Ohm
- 300 Watts x 1 @ 2-Ohm
- Total Power (Sum of Rated Power): 300 Watts RMS
- Dynamic Power (PVC/PowerCube® Measurement):
- 260 Watts x 1 @ 4-Ohms 0° Res
- 444 Watts x 1 @ 2-Ohms 0° Res
- Bridgeable: no
- Efficiency (average):
- 74% @ 4-Ohm
- Crossover Controls:
- High-Pass: 50Hz-250Hz @ 12dB/octave Butterworth
- Low-Pass: 50Hz-250Hz @ 12dB/octave Butterworth
- All-Pass: Yes
- Tone Control:
- Punch EQ2 Bass: 0dB to +18dB @ 45Hz and/or
- Punch EQ2 Treble: 0dB to +12.5dB @ 12kHz
- Function depends upon LP/AP/HP switch position
- Signal Input: Low level: 1 RCA pair
- Signal Output: Low Level: 1 RCA Pair
- Power Input Connector: Captive C-Clamp
- Power Wire Gauge: 8-4 AWG
- Speaker Output Connector: Captive C-Clamp
- Speaker Wire Gauge: 8 AWG to 18 AWG
- Heat Sink Type: Cast aluminum
- Cooling: Convection
- Remote Controls: Optional Punch Level Control (PLC2) Ready
- Visual Indicators:
- Power
- Thermal
- Protect
- Circuit Topology Class: Class A/B
- Frequency Response: 20Hz to 20kHz +/- 1.0dB
- Shipping Weight: 9.5 Lbs. (4.30 Kg.)
- Dimensions (HxWxL): 2.38 x 7.76 x 9.86 (in)
- 6.05 x 19.71 x 25.04 (cm)
Rockford Fosgate P1-1X12 -12" - Punch P1 12" ported enclosed subwoofer
- 12" Single 4 Ohm Punch Series Stage 1 Subwoofer
- Power Handling:
- Peak: 500 watts
- RMS: 250 watts
- Impedance: Single 4 ohm
- High modulus Kevlar reinforced paper cone and dust cap provide durability
- High-density NBR half-roll surround for enhanced excursion
- Custom insulated/isolated 10 AWG nickel-plated compression input push terminal assembly will keep the connection secure and resist corrosion
- Tear and fatigue-resistant poly-cotton spiders will hold up against high amounts of excursion
- High temperature 2" 4-layer voice coil with spun laced Nomex insulating reinforcement collar
- Optimized motor magnetics with extended pole piece and bumped backplate
- Fatigue-resistant and reduced strain stitched-on flexible lead wire design
- Multi-point high-temperature/high-strength neck joint bonding technique for a cleaner bass output
- High-quality 16 gauge compound bend frame geometry adds to the sturdy construction
- Semi flexible PVC removable protective motor cover helps keep motor clean and dust-free
- Proprietary spider venting/cooling technique helps keep the subwoofer operating at a safe temperature
- Decorative ABS trim ring for an attractive appearance
- Frequency Response: 25-250 Hz
- Sensitivity: 86 dB
- Xmax: 7mm
- Full warranty
Enclosure Features:
- Single 12" Loaded, Ported Box
- Solid 5/8" MDF Construction
- Front-firing tuned port
- Spring-loaded binding posts
- Complete with high-density black box carpeting
- Dimensions: 15-3/4"D x 19-1/8"W x 15-1/8"H
Price | £499.99 |
---|---|
Manufacturer | Rockford Fosgate |
Vehicle Manufacturer | None |
Write Your Own Review