Click image to enlarge

YOU MAY ALSO CONSIDER

Rockford Fosgate P1-2X10 Punch P1 Double 10" ported Sub & Bass Box Enclosure

Rockford Fosgate Punch P1 2X10 - with two 1000W Peak Punch P1 Dual 10" P1S410 Subwoofer Loaded Ported Enclosure

In stock
SKU
P1-2X10
Special Price £299.99 Regular Price £319.99 Save £20.00

Rockford Fosgate Punch P1-2X10 - Ported enclosure with two 10" Punch P1 subwoofers

Rockford Fosgate's P1-2X10 ported enclosure fills your ride with juicy, high-volume bass, so you and your passengers can rock out to the latest beats. The enclosure houses two Punch P1 10" woofers that feature paper cones reinforced with Kevlar fibers, supported by rubber surrounds. Heavy-duty motor assemblies and advanced cooling vents allow each of these subs to handle up to 250 watts RMS without flinching.

Rugged 5/8" medium-density fiberboard construction means this enclosure will hold strong for fat, heavy bass. Industrial-grade black carpet provides a clean, finished look, and protects your trunk from nicks and scratches. This enclosure uses an advanced port design that promotes generous air movement while reducing distortion-causing port noise, so you hear louder deeper bass. Add an amp and some wiring, and feel the thick low end this enclosure adds to your ride.

The most convenient way to get low-frequency bass in your system is to drop-in a Punch Loaded enclosure. Punch Loaded enclosures are constructed with durable 5/8" MDF and tuned by Rockford Fosgate's computer-aided design software. P1 Loaded Enclosures feature similar tonal performance as P2 & P3 models but are easier to move in-n-out of vehicles due to their lighter weight.

Rockford Fosgate P1 12" is the first in a series of world-famous subwoofers called "The Punch". During their inception in the 1980s, they quickly became "The Woofer of Choice" for fanatic car audio systems, with a continued tradition today. Kevlar fiber reinforced paper cones deliver bass impact you can feel, and Rockford Fosgate's VAST technology increases surface cone area up to 25%.

 
Product Features:
  • Two 10" Single 4 Ohm Punch Series Stage 1 Subwoofers
  • Power Handling:
    • Peak: 1000 watts total / 500 watts each
    • RMS: 500 watts total / 250 watts each
  • Enclosure impedance: 2 ohms (Wired internally in parallel to final 2-ohm impedance)
  • High modulus Kevlar reinforced paper cone and dust cap provides durability
  • High-density NBR half-roll surround for an enhanced excursion
  • Custom insulated/isolated 10 AWG nickel-plated compression input push terminal assembly will keep the connection secure and resist corrosion
  • Tear and fatigue resistant poly-cotton spider will hold up against high amounts of excursion
  • High temperature 2" 4-layer voice coil with spun laced Nomex insulating reinforcement collar
  • Optimized motor magnetics with extended pole piece and bumped backplate
  • Fatigue resistant and reduced strain stitched on a flexible lead wire design
  • Multi-point high-temperature/high-strength neck joint bonding technique for a cleaner bass output
  • High quality 16 gauge compound bend frame geometry adds to the sturdy construction
  • Semi-flexible PVC removable protective motor cover helps keep motor clean and dust-free
  • Proprietary spider venting/cooling technique helps keep subwoofer operating at a safe temperature
  • Decorative ABS trim ring for an attractive appearance
  • Frequency Response: 30-250 Hz
  • Sensitivity: 85 dB
  • Xmax: 7mm
  • 1-year warranty
Enclosure Features:
  • Dual 10" Loaded, Ported Box
  • Solid 5/8" MDF Construction
  • Front-firing tuned port
  • Spring-loaded binding posts
  • Complete with high-density black box carpeting
  • Dimensions: 15-1/8"D x 31-1/8"W x 13-1/8"H

What's in the box:

  • Vented subwoofer enclosure loaded with two Punch P1S4-10 10" Woofers
  • Installation and Operation Instructions
More Information
Price £319.99
Manufacturer Rockford Fosgate
Vehicle Manufacturer None
Write Your Own Review
You're reviewing:Rockford Fosgate P1-2X10 Punch P1 Double 10" ported Sub & Bass Box Enclosure
Your Rating