Rockford Fosgate M600-5 - 5 Channel 600 watt Marine Amplifier

A compact amp made for marine use

An extensive set of controls allows this 5-channel amp to run your entire system efficiently.

Rockford Fosgate's compact marine amplifiers provide the power you need for a seriously impressive audio system. These amps are designed to stand up to punishing sunlight and damaging moisture, so you can install them with confidence in any boat. You'll enjoy the sound you want and the reliability you need, whether you're blasting across an inland waterways, cruising out to your favorite fishing spot, or just hanging out at the dock.

Power four speakers, plus a sub

The M600-5 amp features four Class A/B full-range channels delivering 50 watts RMS each, plus a dedicated subwoofer channel which uses ultra-efficient Class D technology to send up to 300 watts to your subs.

This 5-channel workhorse can power two sets of speakers and a sub in your boat. You can also bridge the front and rear channels together and power a set of high-performance marine component speakers with 150 watts per channel, and still have 300 watts left for your sub.

The M600-5 features an extensive array of variable frequency filters, so you can adjust the amp's output to suit your system. And the compact footprint makes it easy to mount the amp in a small storage locker or other tight spot.

Product Features:

• Class A/B technology (4 channel)
• Class-D technology (sub channel)
• Remote Punch Level Control (sub channel) included
• RCA and high level input with 2/4/5 channel select
• 12 dB/Oct Butterworth crossovers
• On board Punch EQ control
• Separate Front, Rear and Sub gain control
• Real time output and power supply thermal sensing
• Cast aluminum heat sink
• 4 AWG power/ground connectors
• MOSFET power supply
• Over current and short circuit protection
• Marine grade two part epoxy coating on circuit boards
• Muted turn on
• CEA-2006 Compliant:           [CEA-2006 Guidelines] CEA-2006 Power Rating
• 50Wx4 + 200Wx1 @ 4Ω
• ≤1.0% THD+N
• Number of Channels:           5
• Rated Power
• (RMS Continuous Power):   50W x 4 + 200W x 1 @ 4-Ohm
• 75W x 4 + 300W x 1 @ 2-Ohm
• 150W x 2 @ 4-Ohm Bridged
• Total Power
• (Sum of Rated Power):         600 Watts RMS
• Dynamic Power
• (PVC/PowerCube®):           57W x 4 + 221W x 1 @ 4-Ohm
• 90W x 4 + 390W x 1 @ 2-Ohm
• 178W x 2 @ 4-Ohm Bridged
• Bridgeable:    Yes (front/rear channels)
• Frequency Response:           20Hz to 20kHz +/-1dB
• Efficiency (average):            Channels 1/2/3/4: 64% @ 4-Ohm
• Sub Channel: 85% @ 4-Ohm
• Crossover Controls:   Front Channels: HP/LP Variable 50Hz - 250Hz @ 12dB/octave
• Rear Channels: HP/LP Variable 50Hz - 250Hz @ 12dB/octave
• Sub Channel: LP Variable 50Hz - 250Hz @ 12dB/octave
• Tone Controls:           Front: 0/6/12dB @ 45Hz
• Rear: 0/6/12dB @ 45Hz
• Sub: Variable 0dB to 12dB @ 45Hz
• Signal Input: Low Level: 3 RCA Pair
• Signal Output:           -
• Power Input Connector:       Block
• Power Wire Gauge:   4 AWG
• Speaker Output Connector:             Block
• Speaker Wire Gauge:            12 AWG
• Heat Sink Type:         Cast Aluminum
• Cooling:          Convection
• Remote Controls:       Punch Level Control: When connected is linked to "gain control" to provide remote output level
• Visual Indicators:      Power
• Protect
• Circuit Topology Class:         Front: Class-A/B
• Sub: Class-D
• Shipping Weight:      9.1 Lbs. (4.12 Kg.)
• Dimensions (HxWxL):          1.98" x 6.77" x 13.99"
• (5cm x 17.2cm x 33.5cm)
• Dimensional Diagram: