M2 Series Element Ready™ amplifier
Rockford Fosgate designed this M2 Series amplifier for marine environments, using a special "Element Ready" chassis and conformal-coated PC boards to protect against dust and water. The amp also features a UV stable powder-coated aluminum heatsink and zinc nickel-plated marine-grade brass connection terminals to help prevent corrosion.
Give your speakers the power they need
The M2-200X2 amplifier can power two speakers with 50 watts RMS each, so you'll hear your music clearly over the noises of the wind and waves. You could also use this amp in bridged 1-channel mode to power a 4-ohm subwoofer with up to 200 watts RMS. High- and low-pass filters help you get maximum performance from the speakers.
Setting it up for optimum performance
Rockford Fosgate's C.L.E.A.N. technology (Calibrated Level Eliminates Audible Noise) setup system ensures your music will sound as clean and powerful as possible. It's a simple system to use — turn it up until the light shows red, then turn it down until the red light goes out. Speaker-level inputs let you hook this amp up to almost any system, even a factory radio.
M2-200X2 connection panel
Product Features:
- Rockford Fosgate M2-200X2 2-Channel Element Ready Amplifier
- Power Ratings:
- 50 Watts x 2 @ 4 ohms
- 100 Watts x 2 @ 2 ohms
- 200 Watts x 1 @ 4ohms Bridged/Mono
- Dynamic Power Ratings:
- 60 Watts x 2 @ 4 ohms
- 107 Watts x 2 @ 2 ohms
- 215 Watts x 1 @ 4 ohms Bridged/Mono
- Frequency Response: 20 Hz - 20 kHz
- Low-Level Input Sensitivity: 150 mV - 4 V
- High-Level Input Sensitivity: 450 mV - 12 V
- Total Harmonic Distortion (THD+Noise): <1.0%
- Low-Level Inputs: 2 RCA
- High-Level Inputs: 4-Pin Molex
- Low-Level Outputs: 2 RCA
- High-Pass Crossover: 50 Hz - 250 Hz @ 12dB/Octave Butterworth
- Low-Pass Crossover: 50 Hz - 250 Hz @ 12dB/Octave Butterworth
- All-Pass Crossover: Yes
- 4 gauge power and ground wiring is recommended for installation.
- Recommended Fuse (not included): 30 A
- UK Internet Dealer
- 1-year Manufacturer's Warranty
General Features:
- Full-Range Efficient Class-D
- Features C.L.E.A.N. circuitry to help you adjust your gain settings
- UV stable powder-coated cast aluminum heatsink
- Zinc Nickel-plated Marine grade brass connection terminals
- C.L.E.A.N. input/output clip detection and indicator LEDs
- MEHSA 4 (Maximum Efficiency Heat Sink Application)
- NOMAD: a "real-time" analog computer that protects your amplifier from shorting speaker wires and dangerously low speaker impedances.
- Optimized using AudioGraph PowerCube measurement tool
- Focused mass heatsink design
- Top Mounted Control Panel
- Fully Adjustable 12 dB/octave High and Low pass Butterworth Crossovers
- Short Circuit & Over Current Protection
- Variable Infrasonic Filter
- Integrated Power and Speaker Terminals
- Balanced Differential Inputs via Speaker Line or RCA Inputs
- RCA pass-thru outputs
- Integration with OEM and Aftermarket Radios
- "Auto-Sense" turn-on with remote out (high level in)
- Auto-Sense bypass switch for vehicles with RAP (Retained Accessory Power)
- Low Impedance Stability
- Proprietary testing using RATS (Rockford Automated Testing System)
- CEA-2006 Compliant & CE Compliant
- Dimensions: 1.9"W x 6.8"D x 8.1"H
What's in the box
- 2-Channel marine amplifier
- 7" Speaker input harness
- 3mm Hex key
- Four 3/4" Screws
- 4 Flat washers
- Installation and Operation instructions (English/ French/ Spanish/ German/ Italian)
- Certificate of Performance Verification
- Rockford Fosgate contact information
Price | £299.99 |
---|---|
Manufacturer | Rockford Fosgate |
Vehicle Manufacturer | None |