Big power, small chassis
Rockford Fosgate's compact marine amplifiers provide high-efficiency Class-D power for your marine audio system. They meet tough UV and Salt-Fog protection standards, so you can install them with confidence in your pleasure craft, whether you're blasting across inland waterways, or cruising out to your favorite salt-water fishing grounds.
Up to 1,200 watts
The M1200-D1 mono amp delivers the power you need to belt out the bass, sending 600 watts continuous power to a 4-ohm load, 900 watts to 2 ohms, and 1200 watts to a 1-ohm setup. It's ideal for multi-sub applications where the impedance can drop really low. A variable low-frequency filter adjusts the amp's output to your system, and you can use Punch EQ to add a little low-end bump when you need it. You can install this compact amp in a small storage locker or other tight spot.
Our Moto-marine amplifiers have not only the capabilities you expect a Rockford Fosgate amp to have, but we have designed them to stand up to the environmental conditions you are likely to subject them to. With corrosion resistant stainless steel hardware and two-part epoxy coated circuit boards, these units are designed with you in mind. Whether on the lake, on the road or in the back woods these amplifiers are ready for an adventure.
Dust - We make sure that displays and motor structures are sealed up tight so they look as clear as possible and perform day in and day out no matter how many times you hit the trails.
UV Inhibitor Materials - Centrex and ASA plastic materials are used for their UV radiation resistance and components are tested in accordance with ASTM D4329 testing and certification procedures.
Corrosion Protection (Electronics) – Two part epoxy coated PCB boards prevent corrosion of critical components due to exposure in moisture rich environments.
Stainless Hardware – Stainless hardware is used due to its natural resistance to corrosion and rusting. This ensures that electrical connections will not degrade over time due to exposure to the elements.
Product Features:
- Monoblock Marine Prime Series Class D Amplifier
- RMS Power Rating:
-
- 4 ohms: 400 watts x 1 chan.
- 2 ohms: 800 watts x 1 chan.
- 1 ohm: 1200 watts x 1 chan.
- Pulse Width Modulated MOSFET power supply
- Wired remote bass level control included
- LED power (green) and protect (red) indicators
- Variable Bass Boost (0 to +12 dB bass boost at 50 Hz)
- Soft start turn-on
- Mono channel operation
- Preamp RCA outputs to daisy chain multiple amps
- 3-way protection circuitry (thermal, overload, and speaker short protection)
- Dual speaker terminals simplify the hookup of multiple speakers
- Heavy duty aluminum alloy heat-sink OR high-density split-dome convection heat-sink for extreme heat dissipation
- Nickel-plated RCA level inputs
- Nickel-plated screw terminals
- Variable low-pass filter (50-250 Hz, 24 dB/octave Butterworth)
- Variable 15-40Hz 12dB/octave infrasonic filter
- CEA-2006 compliant amplifier
- Frequency response: 20-250 Hz
- 4 gauge power and ground wiring is required for installation.
- Dimensions: 6-7/10"W x 11"L x 2"H
- 1-year Manufacturer's Warranty
Price | £499.99 |
---|---|
Manufacturer | Rockford Fosgate |
Vehicle Manufacturer | None |