Click image to enlarge

YOU MAY ALSO CONSIDER

PowerBass PS-AWB121T 12" Amplified 200W RMS Bass Reflex Sub in custom Enclosure

Powerbass PSAWB121T - 12" Amplified 200W RMS Bass Reflex Sub in custom Enclosure

 

In stock
SKU
PS-AWB121T
Special Price £379.99 Regular Price £399.99 Save £20.00

Made to fit your boot

You bought a truck because you need a versatile vehicle. But the limited space inside a truck cab makes it hard to find a subwoofer enclosure that'll give you the deep bass you need. At only 5-3/4 inches in depth, the PowerBass PS-AWB121T powered subwoofer houses a 200-watt amp and a 12" speaker in a compact enclosure that'll fit behind the rear seat of most modern trucks.

Made for each other

PowerBass made the computer-designed enclosure to work together with the 12" subwoofer for maximum performance. The sub's molded polypropylene cone has the stiffness to dish out big bass hits, while the large roll butyl rubber surround keeps the cone on track. The enclosure's attractive aircraft-grade vinyl finish protects the cabinet from bumps and scrapes.

Full-featured amp

A 200-watt (RMS) amplifier powers the PS-AWB121T. High- and low-level inputs allow you to connect it to any system, while the included remote knob lets you adjust bass intensity from the driver's seat. Variable crossover and bass boost controls let you tune the sub to your vehicle and favorite kind of music. The amp's protection features include impedance overload, speaker and amp short-circuit, thermal, and DC output protection. When the high-level inputs are used, the amplifier will turn on automatically when it senses the input signal.

Product Features:

  • Single 12" 200 Watt RMS Amplified Slim Subwoofer Enclosure
  • Injection Molded PP Cone Woofer
  • 2" KSV Voice Coil Former
  • Large Roll Butyl Rubber Surround
  • Computer Optimized Sealed Enclosure
  • Durable Aircraft Grade Vinyl Finish
  • 1-Channel 200 Watt High Efficiency Class A/B Design
  • High Level (Speaker)/Low Level (RCA) Input
  • Soft Delay Turn On/Off Circuit
  • Auto Turn-on (high level input only)
  • Variable Low Pass Electronic Crossover 50Hz – 200Hz
  • Variable 12dB Bass Boost EQ @ 45 Hz
  • Variable Gain Control
  • Protection Circuit: Impedance Over-load, Speaker Short, Circuit, Thermal Overheating, and DC Output
  • Wired Remote Gain Control Included
  • Mounting Hardware Included
  • Inputs: Low Level (RCA)/High Level (speaker level)
  • Equalization Boost/Cut: 0dB - 12 dB @ 45 Hz
  • Subwoofer Frequency Range: 20 Hz - 200 Hz
  • Power Supply: PWM MOSFET
  • Bottom Depth: 5.75"
  • Top Depth: 3.75"
  • Height: 14"
  • Width: 30.3
  • Material: Injection Molded PP Cone
  • Dimensions (in Inches): 30.3" x 14" x 3.75" (top depth)/5.75" (bottom depth)
  • S/N Ratio: >85 dB
  • Total Harmonic Distortion: 0.5% at Rated Power
  • Spl: 98 db
  • VC Impedance: 4 ohm
  • Size: Single 12" Thin Mount
  • Frequency Response: 36 Hz - 250 Hz
  • Voice Coil Size: 2"

What's in the Box:

  • Powered subwoofer
  • Remote gain control
  • 16.5' Remote gain cable (RJ-25 connectors on both ends)
  • 8" Speaker-level input harness
  • 2 Mounting brackets
  • 3mm Allen key
  • Eight 7/8" Phillips-head screws
  • 4 Crimp-connectors
  • Owner's manual
More Information
Price £399.99
Manufacturer Powerbass
Vehicle Manufacturer None
Write Your Own Review
You're reviewing:PowerBass PS-AWB121T 12" Amplified 200W RMS Bass Reflex Sub in custom Enclosure
Your Rating