Big sound at sea
It takes a lot of amplifier power for your music to be heard clearly over the sounds of the waves, wind, and engine noise. Pioneer's ME-Series GM-ME400X4 four-channel marine amplifier can put out 75 watts RMS per channel, enough for everyone in and around your boat to hear the music. You could also use this amp in 2-channel bridged mode to power a couple of subs with up to 300 watts RMS each.
Pioneer's ME-Series sweetness
This amplifier's output power matches up perfectly with Pioneer's ME-Series TS-ME650FS and TS-ME650FC marine speakers, which are each rated for 75 watts RMS.
The amp features high- and low-pass filters to tune its output for your speakers and subs, and make them sound good. Conformal-coated circuit boards and rubber connection/control covers keep water and dirt away from sensitive areas.
To prevent circuit shutdown, Pioneer's GM-ME400X4 digital amplifier circuit includes a "Protection Control System" which senses its internal temperature and automatically moderates the input level accordingly. This design enhances the flexibility to connect multiple subwoofers to a system.
For extra flexibility, easy installation is guaranteed thanks to "Automatic Signal Sensing and Turn-On", which automatically detects an input signal and turns the amplifier on and off when connected via the speaker line input.
Variable High Pass Filters (HPF) and Low Pass Filter (LPF) means you can adjust the audio frequency more according to the speaker, subwoofer characteristics and personal listening preferences.
The GM-ME400X4 has a sleek design thanks to its white cosmetics and hairline top plate enhancing the high-quality sense of design and a total of 800W.
Normal and high power modes
The GM-ME600X6 can be switched between high power and normal modes, so you can match the power level to your speakers or your volume preferences.
Normal mode: 75 watts RMS x 6 at 4 ohms, 100 watts RMS x 6 at 2 ohms, 150 watts RMS x 3 bridged at 4 ohms.
High power mode: 100 watts RMS x 6 at 4 ohms, 100 watts RMS x 6 at 2 ohms, 200 watts RMS x 3 bridged at 4 ohms.
Pioneer's ME-Series sweetness
This amplifier's normal mode output power matches up perfectly with Pioneer's ME-Series TS-ME650FS and TS-ME650FC marine speakers, which are each rated for 75 watts RMS.
More info
The amp features high- and low-pass filters to tune its output for your speakers and subs, and make them sound great. Conformal-coated circuit boards and rubber-sealed connector and control panel covers keep water and dirt away from sensitive areas.
Specifications
Product Features:
- Class D amp technology
- Variable low pass and High pass filter
- Automatic Signal Sensing and Turn-On
- Speaker line input sensor
- 6 Channel D class Technology
- Speaker Terminals Block-type
- Continuous Power Output Normal Mode: 6 x 75W RMS (4Ω), 6 x 100W RMS (2Ω)
- Mono Mode: 3 x 150W RMS (4Ω)
- High Power Mode: 6 x 100W RMS (4Ω), 6 x 100W RMS (2Ω)
- Mono Mode: 3 x 200W RMS (4Ω)
- Frequency response 10Hz~240Hz (+0dB,-3dB)
- Input level control RCA (0.2V - 6.5V)
- Sensitivity 95 dB
- Max. current consumption 56A (High Power Mode)
- Size 260(W) X 50.6(H) X 180(D) mm
- Crossover Frequency 50-500Hz, (-12dB/oct) Hz
- Load impedance capability 2 ~8Ω
- Class D amp technology
- Variable low pass and High pass filter
- Automatic Signal Sensing and Turn-On
- Speaker Terminals Block-type
- Continuous Power Output Normal Mode: 6 x 75W RMS (4Ω), 6 x 100W RMS (2Ω)
- Full Manufacturers Warranty
What's in the box:
- 6-Channel marine amplifier (2x40A ATO fuses installed)
- Three 8" RCA-to-speaker wire harnesses
- Four 1" screws
- Logo badge
- Allen key
- Owner's manual
- Warranty information
Price | £479.99 |
---|---|
Manufacturer | Pioneer |
Vehicle Manufacturer | None |