Pioneer GM-ME500X1 1-Channel Class-D 1600W Marine Amplifier

Big bass at sea

It takes a lot of amplifier power for your bass notes to be heard clearly over the sounds of the waves, wind, and engine noise. Pioneer's ME-Series GM-ME500X1 mono marine subwoofer amplifier can put out up to 800 watts RMS, enough for everyone in and around your boat to feel the beat.

Pioneer's ME-Series sweetness

This amplifier's output power matches up nicely with Pioneer's ME-Series TS-ME100WS and TS-ME100WC marine subwoofers, allowing you to build up a large system by adding one sub at a time. When running one sub, the amp puts out 300 watts RMS, exactly the power rating of the sub. With two subs, the amp sends out 500 watts RMS total, 250 watts to each sub. With three of them, it delivers about 700 watts RMS, about 233 watts per sub. And with four, it produces a whopping 800 watts RMS, 200 per sub. Not bad for one little amp.

To prevent circuit shutdown, Pioneer's GM-ME500X1 digital amplifier circuit includes a "Protection Control System" that senses its internal temperature and automatically moderates the input level accordingly. Stable, durable circuitry lessens the risk of high input power for the unit to achieve a 1 Ω connection. This design enhances the flexibility to connect multiple subwoofers to a system.

For extra flexibility, easy installation is guaranteed thanks to "Automatic Signal Sensing and Turn-On", which automatically detects an input signal and turns the amplifier on and off when connected via the speaker line input.

Variable Low Pass Filter (LPF) means you can adjust the audio frequency more according to the subwoofer characteristics and personal listening preferences. The GM-ME500X1 also includes a wired Bass Boost Remote Control.

The GM-ME500X1 has a sleek design thanks to its white cosmetics and hairline top plate enhancing the high-quality sense of design and a total of 1600W.

	Speaker line input sensor connect your existing OEM unit without the hassle of add-on adapters
	Variable LPF adjust your low-pass filter frequency for greater audio system flexibility
	Multi-block Terminal smoothly connect up to 4 subs for high-power audio output
	D-class enjoy the first-class sound and powerful volume on a versatile system at half the size of other units

The GM-ME500X1 features low-pass and a subsonic filter to tune the bass tones to match your subs and make them sound good. Conformal coated circuit boards and rubber connection/control covers keep water and dirt away from sensitive areas.

Product Features:

• Channel(s) 1
• Speaker Terminals Block-type
• LPF
• Maximum power    
• 1 x 600W (4Ω)
• 1 x 1000W (2Ω)
• 1600W Total
• Continuous power output    
• 1 x 300W RMS (4Ω)
• 1 x 500W RMS (2Ω)
• 1 x 800W RMS (1Ω)
• Frequency response 10 Hz - 240 Hz
• Input level control
• RCA (0.2V - 6.5V)
• SP (0.8V - 16V)
• Distortion < 0.05 %
• S/N ratio > 100 dB
• Chassis size (W x H x D)  265 mm x 215 mm x 60 mm
• Bass Boost
• Speaker line input sensor Turn-on sensor
• Bass Boost Remote    
• Crossover Frequency 40 - 240Hz (-12 dB/oct) Hz
• Mono

Other Features:

• Conformal coated circuit boards
• Rubber covers protect side panel controls, RCA terminals, and fuses
• Preamp and speaker-level inputs
• Wiring and hardware not included with amplifier
• 4-gauge power and ground leads recommended
• Fuse rating: 40A x 2
• Dimensions: 10-3/4"W x 2-7/16"H x 8-7/16"DUK Internet Dealer
• 1-year Manufacturer's Warranty

What's in the box: