High-end class D chipset
With the ZT6004 , all channels are designed in Class-D technology.
The commercial vehicle market is often neglected by the car audio industry. Many choose to use the simpler options for passenger cars. Not so with Phoenix Gold. With the launch of the new ZT Series of 24-volt commercial vehicle boosters, we are excited to provide the optimum installation for truckers and bus drivers across the country. Packed with many features typically found only in car alternatives, these Class-D amplifiers have been specifically designed for the commercial vehicle market.
The ZT6004 is a powerful 600 Watt 4-channel 24V Class-D amplifier with a fantastic compact design suitable for even the smallest of installations. With an RMS output of 4x 150W at 2 ohms, 4x 100W at 4 ohms or 2x 300W 4 ohms bridged, this amplifier is versatile. The system is equipped with a high-quality gold design circuit board, which ensures clean and clear power delivery to all your components with its high-quality connection terminal. Along with full protection of the circuitry on the board, the heavy-duty solid terminal block allows maximum current delivery for both low-level and high-level inputs, providing a wide variety of connectivity options for any installation.
With the ZT6004 , all channels are designed in Class-D technology.
The doubly unregulated Phoenix Gold power supplies ensure the amps have dynamic reserves and enable stable operation even with 4 & 2 ohm impedances.
All crossovers of the ZT series amplifiers are equipped with high-quality potentiometers and enable reliable frequency adjustment.
High-quality circuit board for professional SMT assembly, in which each component is computer-controlled and tested before it is attached.
The low-level cinch inputs also allow "high-level". If a high level signal is used, the amplifier will start automatically without a remote signal.
Auto-On is useful if your factory sound system does not provide a remote line to activate the amplifier. If you connect the amplifier directly to the high-level input signal of the system, this can activate the amplifier based on the input voltage.
The intelligent 4-fold protection circuit and the integrated fan system (ZT15001 only) work together optimally to ensure better reliability and more performance in the demanding vehicle environment. The sophisticated protective circuit protects the amplifier during the operation against:
Massive terminal block for up to 25mm² power and ground cables supply the amplifiers with the required current without contact resistance. The +12V terminal is connected directly to the battery using a 25mm² cable - a fuse max. 30cm after the battery terminal is mandatory. The remote input is controlled with the switched +24V of the head unit and GROUND is best connected to a central, well-conducting ground point on the body.
Due to the current levels that occur, the following configuration is recommended for the Z amplifiers:
- Current: 4 gauge (25mm²)
- Speaker: 10 gauge (6mm 2 )
For the best possible sound quality, we recommend premium amplifier connection cable sets from the Stinger brand - suitable for this amplifier, for example the Stinger SK4641, which you can also find in our accessories.
Product Features:
Power Ratings (RMS)
– 100W x 4 @ 4Ohm
– 150W x 4 @ 2Ohm
– 300W x 2 @ 4Ohm (bridged)
– Class-D Technology
– Frequency Response 20Hz – 20kHz
– Signal to Noise Ratio >96dB
– High & Low Pass Crossover 12dB per octave
– Crossover Range 50Hz – 250Hz
– Low-High Level Input Range 0.2V to 10V
– Min Load Impedance 2ohm stereo & 4ohm bridged
– Dimensions (L x W x H) 253 x 160 x 48mm
Price | £249.99 |
---|---|
Manufacturer | Phoenix Gold |
Vehicle Manufacturer | None |