Z1502i 2x75W RMS 4 Ohm 200W 4Ohm bridged
The compact amplifiers of the Z series are equipped with a modern high-end Class-AB chipset and powerful unregulated power supplies. The reliable setting of the optimum frequency is carried out via high-quality potentiometers. The heavy-duty connector block is a testimony to the solid design of the Z-amplifiers and, thanks to the matching hardware, the amplifiers are absolutely convincing in terms of "sound".
The Z-Series amplifiers have been specially designed to integrate them easily and directly into the car to amplify the sound system. Especially the combination of the high-level inputs (optional) with the Auto-Turn-On function allows the original factory sound system to be significantly amplified and equipped with even better speakers. And if you still decide to use an aftermarket radio from well-known brands, the adjustable input voltage will help you to integrate it optimally into the vehicle.
So whether you want to keep the OEM factory radio, install a new aftermarket radio or even change your car, the Z Series amplifiers always provide better performance at an excellent price-performance ratio
Integrated cooling fan regulates amplifier temperature for sustained performance
- OEM connection ready compatible with aftermarket or original source units
- High-level auto turn on powers on the amplifier when an audio signal is supplied
- 4 way protection circuit :
Thermal / Reversed power / Polarity / Low voltage / Short circuit
- Heavy-duty connector block provides maximum current supply
Product features:
Amplifier Specifications:
- RMS Power Rating at 14.4V less than 1% THD
- 75W x 2 @ 2 Ohm Stereo
- 60W x 2 @ 4 Ohm Stereo
- 150W x 1 @ 4 Ohm bridged
- Peak: 600W
- Amplifier Topology: Class-A/B
- Typical efficiency: 55%
- Frequency response: +/- 1 dB from 20Hz - 20kHz
- Signal-to-noise ratio: > 50dB
- Input sensitivity:
- RCA (Low-Level): 0,35V - 10V
- Speaker High Level: 1V - 30V
- Minimum Load Impedance: 4 Ohm bridged & 2 Ohm stereo
Sound tuning
- High & Low Pass Crossovers: 12dB per Octave
- High Pass Crossover Range: 50Hz - 250Hz
Wiring recommendation
- Power/Ground Wire Size: 4 Gauge (25mm²)
- Recommend Power Wire Fuse: 30a
- Speaker Wire Size: 10 Gauge (6mm2)
Measurements
- Dimensions (L x W x H in cm): 49 x 23,2 x 18,6
Price | £129.99 |
---|---|
Manufacturer | Phoenix Gold |
Vehicle Manufacturer | None |