Phoenix Gold Ti32000.1 Ti3 Series Monoblock 1 Channel Amplifier 2000 watts

Phoenix Gold Ti32000.1, 1-Channel Amplifier 2000W with BASS SHIFT

Our Ti3-Series of amplifiers are the new Reference class from Phoenix Gold. Utilizing ingenious features like POWER SHIFT, BASS SHIFT, True Full Range Class D and flexibility; the Ti3 is the beginning of a new legend in mobile audio reproduction. Stunning chassis design with integrated control panels, illuminated Tri-light status display and end panel connections all add to the breathtaking design and attention to detail Phoenix Gold has applied to this new series of amplifiers.

All features at a glance

Full range capable Class-D Topology

The mono channel are held in excellent Full Range Class-D topology with an especially efficient Class-D chipset for outstanding 85% efficiency.

Unlike conventional monoblocks, which are designed exclusively for bass applications, the Ti3 can be configured as a powerful mono amplifier or used in pairs to create an incredibly powerful stereo output. Applications such as driving a large number of full-range speakers or a powerful set of components with unlimited channel separation with independent left and right amplifiers.

Master/Slave modes for incredible power & multi-amp setups

Strapped Mode
Do you have a monster subwoofer that you want to power? No problem! You can strap two Ti32000.1 together to form a single output for 4000 watts at 2 ohm.

Linked Mode
Allows you to connect any number of Ti32000.1 amplifiers to a Master Ti32000.1. All settings of all slave amplifiers are easily controlled by the master amplifier. Linked mode is extremely useful when several amplifiers and speakers are installed, with the desire to operate them together. The master amplifier controls all other slave amplifiers in this configuration. The setting of the master amplifier allows slave amplifiers to become exact duplicates of the master, making setup easy while having predictable results.

Double tier / Multi Rail power supplies (MRS)

The legendary, unregulated Phoenix Gold dual power supplies provide amp's dynamic reserves for more power and less heat and ensure stable operation even at 1 Ohm impedances.

Peak Voltage Drive (PVD)

Automotive grade, High current MOSTFETs with peak voltage drive for extreme amperage capability and heat tolerance.

24dB Subsonic/ Low-pass crossovers

24dB Linkwitz-Riley crossovers for precise frequency control. Matched input level for (Phase) compensation of vehicle acoustics and subwoofer placement. 24dB adjustable subsonic filter to optimze speaker and enclosure efficiency. BASS SHIFT can be adjusted from the listening position via the included controller.

Ultra low ESR capacitors

Create a stable supply for lightnig fast transient response. Using zero inductance chip bypass for increased current capability.

Individual Low Loss Output Filters

Ensures the lowest THD possible per channel for noise free operation.

High Performance IC Chipsets

With low noise and high slew rate for incredible sound quality.

OTM - On-Board Thermal Management

OTM monitors amplifier internal temperatures, and if abnormal temperatures are achieved, OTM will make minor adjustments to output power to allow the amplifier to return to normal operating temperatures without interruption.

Thermal Dynamic Exchange (TDE)

Thermally optimized heatsink with computer aid modeling for efficient heat dissipation and cooler running temperatures.

Bass Shift® - RBPC Remote Control with Bass Level and Phase Controller

The Ti3 series is supplied with the RBPC remote control for the subwoofer level and new for the 0 - 180° phase adjustment. Properly adjusting phase will allow enhanced bass response, dynamics and impact at any volume.

New Tri-Light LED Monitoring System

The amplifier's new Tri-Light Status Monitoring System always keeps you informed of the current operating status or technical problems with coloured LED's:

• Blue - Standard Operation
• Green - Over Voltage Warning and Thermal Protection
• Amber - DC/Short Protection
• Red - Internal Fuse Blown

Advanced protection circuits

Protection in case of Short circuit, thermal and voltage protection.

Switchable balanced or unbalanced inputs

Provides input matching flexibility for noise rejection from source signal components. Select "Balanced" or "Unbalanced" inputs based on your input source’s design for best S/N performance. Balanced inputs ensure maximum reduction of the noise level in the signal path from the upstream components and thus a low harmonic distortion.

Intelligent Auto-turn on circuit

Auto-on is useful when connecting to an OEM system that does not offer a Remote turn-on lead to activate the amplifier. When connecting directly to the amplifier using a high-level input signal the circuit can detect the input voltage (BTL <1V DC) and activate the amplifier.

If it is an OEM system that stays active even with the radio off (voltage on signal wires) move the switch to the OFF position and locate an alternative circuit or PAC L.O.C. PRO device to activate the amplifier.

Massive connection block terminal

Massive connection block terminal, solid supports for up to 25mm² of power and ground cables provide the amplifiers with the required current without contact resistance. The +12V terminal is connected to the vehicle battery via a fuse - fuse max. 40cm behind the battery! The remote input is controlled by the +12V head unit and GROUND is best connected to a central, well-conducting ground point on the body.

Our recommendation for wiring

Due to the current occurring, the Ti3 amplifiers should be configured as follows:
- Power: 4 Gauge (25mm²)
- Fuse: 200A
- Speaker: 10 Gauge (6mm²)

For the best possible sound quality, we recommend premium amplifier connection cable sets from the Stinger brand - suitable for this amplifier e. g. the Stinger SK4641 which you will find in our accessories.

Top panel adjustments

With removable magnetic and acrylic cover.

Complex final control of the sound parameters with Audio Precision Equipment

Each Phoenix Gold amplifier is subjected to an extensive final inspection with audio precision measurement technology - the recognized standard for audio measurement technology. For more than 30 years Audio Precision has been offering excellent audio analyzers and software, supporting Phoenix Gold in the development, testing, customization and production of premium audio components.

Hand-signed power output birth certificate with actual measured performance

Each Phoenix Gold amplifier receives a power output birth certificate with the actual measured performance data before leaving the factory. With the Ti3 series, this can be up to 20% higher than the RMS performance specified in the brochure. (Symbolic figure)

RMD-ready: Optional display for voltage indication

Each Phoenix Gold amplifier is designed for connection of the optionally available voltage display and has a Western socket in the housing.

Product Features:

• RMS Power Ratings listed at less than 1% THD @ 14.4v2000W x 1 @ 1 Ohm Stereo
  1300W x 1 @ 2 Ohm Stereo
  900W x 1 @ 4 Ohm Stereo
• Total RMS Power: 2000W
• Master/Slave-Mode: Yes (4000W x 1 @ 2Ω Strapped)
• Amplifier type: Class-D topology
• Efficiency: 85%
• Damping Factor: Greather than 200
• Turn on Delay: <5s
• Input Selection300mV - 8V (Unbalanced)
• 600mV - 16V (Balanced)
• Lowest recommended load: 1 Ohm Stereo
• Soundtuning
• Crossover Type: Linkwitz-Riley
• Crossover Modes: Subsonic (HPF) / Lowpass (LPF / Bypass)
• Subsonic (HPF) Crossovers: 24dB per Octave
• Lowpass (LPF) Crossovers: 24dB per Octave

Wiring recommendation

• Power/Ground Wire Size: 4 Gauge (25mm²)
• Recommend Power Wire Fuse: 200A
• Speaker wire size: 10 Gauge (6mm²)