Phoenix Gold Ti31200.4 - Ti3 Seriess 4 Channel Amplifier 1200w watts

Phoenix Gold Ti31200.4, 4-Channel Amplifier 1200W with POWER SHIFT & BASS SHIFT

Our Ti3-Series of amplifiers are the new Reference class from Phoenix Gold. Utilizing ingenious features like POWER SHIFT, BASS SHIFT, True Full Range Class D and flexibility; the Ti3 is the beginning of a new legend in mobile audio reproduction. Stunning chassis design with integrated control panels, illuminated Tri-light status display and end panel connections all add to the breathtaking design and attention to detail Phoenix Gold has applied to this new series of amplifiers.

All features at a glance

• 

  Full range capable Class-D Topology

  All channels are held in excellent Full Range Class-D topology with an especially efficient Class-D chipset for outstanding 80% efficiency.

• 

  POWER SHIFT®

  Phoenix Gold’s exclusive feature to allow you to direct power where it is needed. Active system design has never been easier. Why waste output power when it can be redirected to the channels that can better utilize it. Insane amplifier efficiencies and output are achieved with POWER SHIFT. With POWER SHIFT deactivated, the amplifier will produce equal power to all channels (with similar gain settings). To activate POWER SHIFT first power down the amplifier; then switch the front panel selector to ON. Power up the amplifier and the front panel indicator will verify POWER SHIFT is active. Output power from the front channels is redirected to the rear channels.

  For an active 2-way front stage, this is the perfect setup, the amplifier shifts from 225w per ch @4Ω to a more usable 150w front ch 300w rear ch setup, into 2Ω the amp produces 200w per channel on 1&2 plus 400 per channel on 3&4. Since the gain controls will be set to similar levels as the amplifier is producing different output power instead of severely turning down the front gains to compensate, the power levels are extremely linear thru the full output range. Audiophiles rejoice!

  Another option is a powerful passive front stage and bridge the rear channels to a subwoofer. In this configuration, the front channels would get a respectable 150w per ch @ 4Ω plus a whopping 800w @ 4Ω mono for a subwoofer; Yes please.

   

• 

  Double tier / Multi Rail power supplies (MRS)

  The legendary, unregulated Phoenix Gold dual power supplies provide amp's dynamic reserves for more power and less heat and ensure stable operation even at 2 Ohm impedances.

• 

  Peak Voltage Drive (PVD)

  Automotive grade, High current MOSTFETs with peak voltage drive for extreme amperage capability and heat tolerance.

• 

  12dB High/Low-pass crossovers

  All Linkwitz-Riley crossovers of the Ti3 series are equipped with high quality aluminium potentiometers and allow a precise frequency control. Matched input level for (Phase) compensation of vehicle acoustics and subwoofer placement.

• 

  Ultra low ESR capacitors

  Create a stable supply for lightnig fast transient response. Using zero inductance chip bypass for increased current capability.

• 

  Individual Low Loss Output Filters

  Ensures the lowest THD possible per channel for noise free operation.

• 

  High Performance IC Chipsets

  With low noise and high slew rate for incredible sound quality.

• 

  OTM - On-Board Thermal Management

  OTM monitors amplifier internal temperatures, and if abnormal temperatures are achieved, OTM will make minor adjustments to output power to allow the amplifier to return to normal operating temperatures without interruption.

• 

  Thermal Dynamic Exchange (TED)

  Thermally optimized heatsink with computer aid modeling for efficient heat dissipation and cooler running temperatures.

• 

  Bass Shift® - RBPC Remote Control with Bass Level and Phase Controller

  The Ti3 series is supplied with the RBPC remote control for the subwoofer level and new for the 0 - 180° phase adjustment. Properly adjusting phase will allow enhanced bass response, dynamics and impact at any volume.

• 

  New Tri-Light LED Monitoring System

  The amplifier's new Tri-Light Status Monitoring System always keeps you informed of the current operating status or technical problems with coloured LED's:

  • Blue - Standard Operation
  • Green - Over Voltage Warning and Thermal Protection
  • Amber - DC/Short Protection
  • Red - Internal Fuse Blown
• 

  Advanced protection circuits

  Protection in case of Short circuit, thermal and voltage protection.

• 

  Switchable balanced or unbalanced inputs

  Provides input matching flexibility for noise rejection from source signal components. Select "Balanced" or "Unbalanced" inputs based on your input source’s design for best S/N performance. Balanced inputs ensure maximum reduction of the noise level in the signal path from the upstream components and thus a low harmonic distortion.

• 

  Intelligent Auto-turn on circuit

  Auto-on is useful when connecting to an OEM system that does not offer a Remote turn-on lead to activate the amplifier. When connecting directly to the amplifier using a high-level input signal the circuit can detect the input voltage (BTL <1V DC) and activate the amplifier.

  If it is an OEM system that stays active even with the radio off (voltage on signal wires) move the switch to the OFF position and locate an alternative circuit or PAC L.O.C. PRO device to activate the amplifier.

• 

  Massive connection block terminal

  Massive connection block terminal, solid supports for up to 25mm² of power and ground cables provide the amplifiers with the required current without contact resistance. The +12V terminal is connected to the vehicle battery via a fuse - fuse max. 40cm behind the battery! The remote input is controlled by the +12V head unit and GROUND is best connected to a central, well-conducting ground point on the body.

• 

  Our recommendation for wiring

  Due to the current occurring, the Ti3 amplifiers should be configured as follows:
  - Power: 4 Gauge (25mm²)
  - Fuse: 100A
  - Speaker: 10 Gauge (6mm²)

  For the best possible sound quality, we recommend premium amplifier connection cable sets from the Stinger brand - suitable for this amplifier e. g. the Stinger SK4641 which you will find in our accessories.

• 

  Top panel adjustments

  With removable magnetic and acrylic cover.

• 

  Complex final control of the sound parameters with Audio Precision Equipment

  Each Phoenix Gold amplifier is subjected to an extensive final inspection with audio precision measurement technology - the recognized standard for audio measurement technology. For more than 30 years Audio Precision has been offering excellent audio analyzers and software, supporting Phoenix Gold in the development, testing, customization and production of premium audio components.

• 

  Hand-signed power output birth certificate with actual measured performance

  Each Phoenix Gold amplifier receives a power output birth certificate with the actual measured performance data before leaving the factory. With the Ti3 series, this can be up to 20% higher than the RMS performance specified in the brochure. (Symbolic figure)

• 

  RMD-ready: Optional display for voltage indication

  Each Phoenix Gold amplifier is designed for connection of the optionally available voltage display and has a Western socket in the housing.

Product Features:

Amplifier Specifications:

• RMS Power Ratings listed at less than 1% THD @ 14.4v
  • 225W x 4 @ 4 Ohm stereo
  • 300W x 4 @ 2 Ohm stereo
  • 600W x 2 @ 4 Ohm bridged
• POWER Shift@ Active
  • 150W x 2 (1&2) + 300W x 2 (3&4) @ 4 Ohm stereo
  • 200W x 2 (1&2) + 350W x 2 (3&4) @ 2 Ohm stereo
  • 400W x 1 (1+2) + 800W x 1 (3+4) @ 4 Ohm bridged
• Total RMS Power: 1200W
• Amplifier type: Class-D topology
• Efficiency: 80%
• Frequency Response: +/- 1 dB from 10Hz - 30kHz
• Signal to Noise: -84dB
• Damping Factor: Greather than 200
• Turn on Delay: <5s
• Input Selection
  • 300mV - 8V (Unbalanced)
  • 600mV - 16V (Balanced)
• Lowest recommended load: 4 Ohm bridged or 2 Ohm Stereo

Soundtuning

• Crossover Type: Linkwitz-Riley
• Crossover Modes: Flat / Lowpass / Highpass / Bandpass
• High & Low Pass Crossovers: 12dB per Octave
• Crossover Range: 55Hz - 4kHz
• Bass Boost: 6dB @ 40Hz

Wiring recommendation

• Power/Ground Wire Size: 4 Gauge (25mm²)
• Recommend Power Wire Fuse: 100A
• Speaker wire size: 10 Gauge (6mm²)

Power requirements

• Operating Voltage: 11-16,1 VDC
• Input Impedance: 20 kOhm
• Idle Current: >1A
• Average Current Draw @ 14.4v Music: 25A @ 4 ohm

Measurements

• Dimensions (L x W x H in cm): 47 x 23 x 5