Phoenix Gold Ti265CS 16,5cm Component Speaker Set
The Phoenix Gold Ti265CS Component Speaker Set has a 20mm silk dome tweeter in a black aluminium housing. This housing is CNC machined from a solid aluminium block. The 165mm mid-bass has a double-M diaphragm that eliminates unwanted resonance and acoustic artifacts and absorbs mechanical vibrations. The component system has been optimized by means of complex computer analysis to ensure the best possible drive. Though developing a great tweeter and mid-bass is not yet a guarantee for excellent music reproduction.
The passive crossover of the Ti-composite system was modeled on a computer and then optimized in countless practical tests until a seamless transition of the frequency range from tweeter to bass/midrange driver was found. As a result, the Ti265CS offers a breathtaking dynamic range and incredible musicality. It convinces with its tonal linearity, excellent detail reproduction, and impressive three-dimensionality.
Overview of performance
All features at a glance
Ferrofluid-cooled, 20mm silk-dome tweeter in CNC-manufactured aluminium housing for 3 different installation positions.
Powder-coated die-cast aluminium basket for linear stroke and optimal flow characteristics.
Double-M rubber bead
An extensive Double-M rubber bead for perfect diaphragm control of the bass/midrange driver.
Damped, low-resonance polypropylene membrane with Dustcap in phase plug form for optimized frequency response.
Connecting terminal with interwoven pigtails.
High quality equipped crossover
The crossover is very complex, there are no fewer than 15 components on the circuit board, and the tweeter is the one that takes up most of the space. With 3-stage tweeter level adjustment and 2-stage tweeter protection activation as well as switchable midrange lowering and screw terminals up to 5mm².
2-stage high tone protection activation
The majority of the loudspeaker component systems available on the market offer the simple protection of a single-stage "tweeter cut-off". However, the Elite series supports a 2-stage protection circuit (PTC and incandescent lamp) which does not switch off the tweeter in case of overload, but continues to run via a resistor and the bulb, so that the music plays without interruption, but with a protected tweeter. Likewise, the Elite circuitry constantly monitors the signal without actually passing the signal through these components. Most other two-stage or complex tweeter protection circuits require the signal directly in the components, but this can affect the music performance.
3-stage tweeter level adjustment
It allows you to adjust the output level of the tweeter as follows: -2dB, 0dB and +2dB.
Switchable center lowering
When activated, the kick bass range is emphasized and the midrange is lowered. This setting is ideal for chart music and most MP3 material. When deactivated, the frequency response is absolutely linear - perfectly dynamic audiophile recordings of classical music, e. g. For most systems we recommend to have the tweeter on 0db or +2dB and to activate the midrange reduction. However, the settings can vary depending on your hearing sensation - here it is important to find the best possible setting for your personal taste.
The perfect upgrade for your OEM-speaker system
The Ti265CS Compo system is ideally suited as a sound upgrade of the factory loudspeakers behind the front and rear door panel thanks to its removable protective grille and shallow installation depth.
- 20mm Silk Dome Tweeter
- Fully Machined Aluminum Tweeter Housing
- Poly Treated Paper Cone
- Smooth Termination Dual Roll Rubber Surround
- Powder Coated Stamped Steel Basket
- Custom Tooled Crossover Housing with Direct Wiring Connections
- Audiophile Crossover with Tweeter and Midbass Adjustments
- Continuous Play Tweeter Protection Circuitry
- Integrated Aluminum Dust Cap
- Interwoven Tinsel Leads
- High Temperature CAE/CAD Motor Structure
- RMS Power Handling: 125W
- Impedance: 4-Ohms
- Mounting Depth: 62.5mm
- Mounting Diameter: 141.5mm