SEE OTHER PRODUCTS BY Phoenix Gold
Phoenix Gold RX2 12D 30cm 200W Subwoofer (2x 4 Ohm)
The RX2 subwoofers are built to deliver impressive bass and have an excellent price/performance ratio. In contrast to the usual 1.5 inch voice coils, solid 2 inch voice coils are used here and allow a maximum membrane deflection of 25mm. The result is a deep, precise bass, whether in ventilated or closed cabinets. The woofers are available with 4Ohm single or double voice coil and with their optimal power delivery, already at 100-300W RMS, the perfect starting point for your new sound system.
Overview of performance
|
All features at a glance
Best possible power delivery at 100W-300W RMS
200W RMS is the optimal power range for every RX2 subwoofer. In a closed or bass reflex cabinet, the woofer will exploit its full potential and be very durable. Firing a RX2 Sub with more than 200W RMS generates only significantly more heat in the drive with the minimal power increase.
Contrary to popular car audio myths, subwoofers do not need as much power as you think. A well engineered subwoofer such as the RX2 that has the proper balance of efficiency, compliance and excursion will reach extremely loud levels with much less power than most users would expect.
Powder-coated anti-resonance steel basket
The very solid steel basket not only provides the membrane with enough space for air movement but also leaves plenty of room for deflecting the membrane underneath the centering.
25mm max. membrane deflection
For effective air movement.
The huge ferrite magnet system
The high-performance magnet delivers a powerful drive.
High-temperature resistant 51mm (2") copper voice coils
51mm (2") high-precision wound and high-temperature resistant copper voice coil on a ventilated aluminium voice coil carrier for even better performance and durability. (Img. symbolic)
Vented Kapton Former
The copper voice coil is wound onto a perforated Kapton former for better heat dissipation.
Long Throw Spider Suspension
For effective membrane control and precise deflection at high volume levels.
Polypropylene dustcap
Very stable and solid polypropylene dust cap.
A highly flexible rubber bead
The very stable and durable butyl rubber bead is also up to date with its high profile, which allows a lot of strokes but takes away only a small amount of membrane surface and thus provides the most linear frequency response.
Push terminals
Optimum signal transmission thanks to solid nickel-plated push connections and convenient cable connection for direct reception of cables up to 4mm² (12GA).
Pigtails
Flexible pigtails held with shrink tubing for long-lasting contact reliability.
Pole core ventilation
A hole in the pole plate provides additional ventilation for the voice coil.
Product Features:
- Performance recommendation: 100-300W
- RMS: 200W
- maximum deflection: 25mm
- Impedance: 2x 4 Ohm
- Frequency: 20Hz - 300Hz
T/S parameters
- DC resistance (Dcr): 3,4 Ohm
- Resonance frequency: 28 Hz
- Membrane surface (Sd): 51cm²
- B*l: 9,02 Tm
- Mechanical quality (Qms): 4,57
- Electrical quality (Qes): 0,7
- Overall quality (Qts): 0,61
- Atomic volume (Vas): 51,09 Liter
- Cms: 137,94 uM/N
- Moving load (Mms): 171,98g
- Acoustic pressure (SPL): 85,9dB
Measurements
- diameter: 318mm
- mounting diameter: 282mm
- mounting depth: 145mm
- Authorised Internet Dealer
- 1-year Manufacturer's Warranty
- SOLD AS INDIVIDUAL UNITS
| Price | £144.99 |
|---|---|
| Manufacturer | Phoenix Gold |
| Vehicle Manufacturer | None |
SEE OTHER PRODUCTS BY Phoenix Gold