Phoenix Gold GX10D42 25cm 400W Subwoofer (2x 4 Ohm) Daul Voice Coil Subwoofer

Phoenix Gold GX10D4 25cm 400W Subwoofer (2x 4 Ohm)

GX subwoofers are engineered for heart-pounding performance and a breathtaking sound experience. These subwoofers feature advanced MLB and CFL3 technologies. Pair GX subwoofers with the GX amplifiers and create an unbeatable combination of sound quality and dynamic performance.

All features at a glance:

• Dual Cone Design- To strengthen the rigidity of the woofer’s cone body to minimize the distortion while increasing the handling of high pressure produced in the subwoofer enclosure
• Magnetic FEA High-Efficiency Motor- provides highest possible, efficient motor design
• Thermal Efficient Design via Vented Motor- providing better thermal efficiency, reduces motor compression and extended low-frequency response
• Reduced Motor Compression via Vented Motor
• Double Looped and Sleeved Lead Wires for High Excursion- reduces wire roping and allows high excursion, increased flexibility and long life
• Special Push Type Terminals with Short Prevention
• BEEF’ed Up- Bent Edge Enhanced Frame- minimizes overall resonance and provides accurate sound with less distortion
• Linear Surround Technology- for high excursion
• Black Anodized Voice Coil Former- heat dissipation
• CFL³ Technology Voice Coil- 3x more structurally rigid, prolonging the life of voice coil
• MLB Collar Technology- enables micro-level bonding with cone & spider for increased strength
• Linear Long Throw Spider Suspension- for increased output and power handling

Product Features:

• Nominal Impedance: 3.50 ohms
• DC Resistance (Re): 7.00 ohms
• Resonance Frequency: 27.53 Hz
• Piston Area (Sd): 0.0314 m2
• Force Factor (BL): 21.04 Tm
• Mechanical Q Factor (Qms): 3.47
• Electrical Q Factor (Qes): 0.30
• Total Q Factor (Qts): 0.27
• Sensitivity 1W/M (SPL): 86.78 dB
• Mechanical Compliance (Cms): 0.31 mm/N
• Moving Mass (Mms): 108.37 g
• Linear Excursion (Xmax): 9 mm
• Volume Acoustic Compliance (Vas): 42.50 Ltr / 1.50 cu ft
• Reference Efficiency (NO.): 0.29%
• Voice Coil Diameter: 2.5 in/63.5 mm
• Displacement: 0.07 cu ft/1.84 Ltr
• Overall Diameter: 10.43 in/265 mm
• Cut Out Diameter: 9.125 in/231.77 mm
• Mounting Depth: 5.47 in/139 mm