SEE OTHER PRODUCTS BY InCarTec
Complete stereo upgrade fitting kit to install a Double DIN aftermarket radio and retain the use of the steering wheel audio controls in Nissan Qashqai and X-Trail (2014 - 2017) car models.
| MAKE | MODEL | YEARS | NOTES |
| Nissan | Qashqai | 2014 - 2017 | 2nd Gen (J11) |
| Nissan | X-Trail | 2014 - 2017 | 3rd Gen (T32) |
Complete stereo upgrade fitting kit to install a Double DIN aftermarket radio and retain the use of the steering wheel audio controls in Nissan Qashqai and X-Trail (2014 - 2017) car models
This complete head unit fitting kit includes:
Nissan car aerial antenna adapter (21-118)
Nissan grey rectangle female antenna connector to male DIN car aerial antenna adapter cable.
This cable adapts from the grey plastic rectangle Nissan antenna connector in the car to a standard aftermarket male DIN connector, this is used when fitting a new aftermarket radio.
This is a passive antenna adapter, however there is a loose wire that needs to be connected to the antenna turn on output from the new radio, this turns on the original antenna amplifier in the car.
Nissan Steering wheel control interface (29-CTSNS011)
Steering wheel control interface to retain the use of the vehicles audio steering wheel controls. This interface adapts the original Nissan connectors behind the factory radio to standard ISO connectors used when installing an aftermarket head unit. Will also provide CAN ignition, speed pulse and handbrake outputs and retain the use of the original USB and AUX connections (if required)
PLEASE NOTE: These cars have various different set-ups behind the radio, please remove the radio and check if you have a 24/32 or 40 pin connector, before purchasing a solution.
29-CT universal patch lead (29-CT-025)
Universal patch lead for 29-CT series steering controls. This cable plugs into the Steering wheel control box and into either the 3.5mm socket or single wire on the back of the head-units.
Suitable for Alpine, Clarion, JVC, Kenwood, Pioneer, Sony and Chinese head-units that are steering wheel remote ready.
Nissan Qashqai, X-Trail (2014 - 2017) Double DIN fascia (50-943)
Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket version
172mm x 98mm
This fascia includes side fixing brackets so no fitting cage is required
Fits Nissan Qashqai, X-Trail (2014 Onwards) car models
COLOUR: GLOSS BLACK
PLEASE NOTE: For Single DIN fitting, an additional pocket will be required
Useful tools (Sold Separately)
- Trim Panel Tool Set - A must have for any installer who has to remove plastic trim, to avoid damage to the delicate finishes on both interior and exterior trim. These trim tools are made from a nylon with a non-damaging finish to avoid cosmetic blemishes to the interior or exterior of your vehicle from removing panels and trim.
- Digital Multimeter - A small, low cost multimeter, a useful tool for testing and finding issues with car electrics and audio systems, and an essential tool for novices as well as car audio professionals.
- Led Headlamp Torch - Gives great visibility when working on a vehicle in the workshop, great for locating those dark hard-to-see locations during an installation.
- Disposable Gloves - Offer great protection for your hands during installations. Also trusted across various sectors, including automotive, agriculture, healthcare, food and catering, manufacturing, and more.
| Price | £179.99 |
|---|---|
| Manufacturer | InCarTec |
| Vehicle Manufacturer | Nissan |
Write Your Own Review
SEE OTHER PRODUCTS BY InCarTec