Car audio steering wheel control and BOSE retention interface for select Nissan car models with 6 function audio controls on the steering wheel and 20 pin connectors at the back of the radio. (Does not include the i button)
The cable adapts from the 20-pin Nissan connector (the connector has a larger size terminal at either end of the connector) in the car to standard aftermarket ISO connectors. This replaces the need for a separate ISO radio replacement adapter cable.
The steering wheel control interface is built in to the adapter cable for a plug-and-play installation.
This interface will allow the original audio control buttons on the steering wheel to work with the new aftermarket radio. The interface will work the volume, track skip, source and phone buttons. (6 function steering wheels)
This interface fits cars with the newer 20-way car audio connector that has two larger size terminals at either end of the connector.
These radios will also have an additional smaller connector, which is used for CD changer and navigation audio. It is not used when changing the head unit.
The amplifier interface included with this product converts the high-level audio output of a new head unit to a low-level pre-amplified signal which will work with the factory-fit Nissan BOSE amplifier.
Compatibility:
MAKE | MODEL | YEARS | NOTES |
Nissan | Qashqai | 2007 - 2013 | 1st Gen (J10) |
Installation notes
- Connect male ISO(S) of the steering wheel control interface to the female ISO(S) of the aftermarket radio lead/head unit
- Loose black wire - Connect the radio ground earth ring to the vehicles chassis ground
- Loose pink wire - Connect the pink wire to the speed pulse connector on the aftermarket radio (Not all radios have this, please check manufacturers instructions)
- Loose blue wire (Antenna turn-on) - This needs to be connected to the antenna turn on cable on the antenna adapter cable. We would recommend using our interface with a Nissan antenna adapter With male bullet connection, our part number 21-118K (SOLD SEPARATELY)
Compatibility notes:
- Qashqai 07-13 cars with original Nissan Connect sat nav (Double DIN navigation radio) and BOSE audio. Not compatible for Qashqai cars with original dash top navigation screens.
Below are examples of 6 function steering wheels.
PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted.
Radio Being Fitted | Part Number | Short Description |
Resistive Programming (Loose Wire) | 29-000 | Loose wire Patch lead for 29-Series Steering wheel control for Resistive Programming, Chinese, Xtrons, Pumpkin, Joying or unbranded stereos. |
Alpine | 29-001 | Patch lead for 29-Series Steering wheel control for Alpine stereos. |
Clarion | 29-003 | Patch lead for 29-Series Steering wheel control for Clarion stereos. |
JVC (Single Wire) | 29-004SW | Single Wire Patch lead for 29-Series Steering wheel control for JVC stereos. |
Kenwood | 29-005 | Patch lead for 29-Series Steering wheel control for Kenwood stereos. |
Pioneer | 29-007 | Patch lead for 29-Series Steering wheel control for Pioneer stereos. |
Sony | 29-008 | Patch lead for 29-Series Steering wheel control for Sony stereos. |
Resistive Programming (3.5 Jack) | 29-016 | 3.5mm Jack Patch lead for 29-Series Steering wheel control for Resistive Programming, Chinese, Xtrons, Pumpkin, Joying or unbranded stereos. |
Universal | 29-025 | Self-Pinning Patch lead for Alpine, Kenwood, JVC (single wire), Pioneer, Sony and Chinese/Resistive programming head units with either two wires or a 3.5mm jack. |
Price | £99.99 |
---|---|
Manufacturer | InCarTec |
Vehicle Manufacturer | Nissan |