Nissan 20 pin radio replacement adapter cable and steering control interface 29-683

Steering wheel control interface and adapter cable for Nissan Juke, Micra K13, Navara D40, Note, Qashqai and X-Trail cars to fit an aftermarket radio upgrade.

The cable adapts from the 20 pin Nissan connector (the connector has a larger size terminal at either end of the connector) in the car to standard aftermarket ISO connectors. This replaces the need for a separate ISO radio replacement adapter cable.

The steering wheel control interface is built in to the adapter cable for a plug and play installation.

This interface will allow the original audio control buttons on the steering wheel to work with the new aftermarket radio. The interface will work the volume, track skip, source, phone and preset skip buttons. (8 function steering wheels)

The Enter and Back buttons will not be functional after the radio has been changed.

This interface fits cars with the newer 20 way connector behind the radio which has two larger terminals on either side for power and earth.
For compatible Bluetooth Head-units press the phone button to answer phone, press and hold the phone button to reject/end a call.
These radios will also have an additional smaller connector, this is used for CD changer and navigation audio. It is not used when changing the head unit.

Compatibility notes:

Juke 2010 onward models

Micra K13 models

Navara D40 cars with original dash top navigation screens. Not for vehicles with basic radios or Nissan Connect double din sat nav radios.

Note 2013 - 2018 cars.

Pathfinder 2005 - 2013 cars with original dash top navigation screens

Qashqai 2007 - 2013 cars with original dash top navigation screens. Not for cars with basic radios or Nissan Connect double din sat nav radios.

X-Trail 2007 - 2014 cars with origingal dash top navigation screens. Not for cars with basic radios or Nissan Connect double din sat nav radios.

Below are examples of 8 function steering wheels