YOU MAY NEED
SEE OTHER PRODUCTS BY Morel
Power station
Morel built this MPS 5.950 amplifier so their high-performing speakers and subwoofers would have an amp worthy enough to power them, delivering high-fidelity musical reproduction along with pure, clean power. The MPS 5.950 can send 70 watts RMS to each of your front and rear speakers plus 550 watts RMS to a sub, powering a full system from its 18-5/16" long chassis. You can also set this amplifier to 3-channel mode and power a couple of high-performance speakers with 200 watts RMS each while sending a sub 550 watts.
Low-noise design
Morel made sure that every detail of this amplifier's design would result in lower noise and higher sound quality. The front and rear channels' Class AB architecture achieves the cleanest signal with the least distortion. The subchannel's Class D design puts out a clean signal with very little noise. Balanced differential inputs reject interference. An onboard microprocessor controls the thermal management system, keeping the amp running cool and steady no matter how hard it's driven. All the connections are on one side of the amp to keep the wiring neat, organized, and simple for the installer.
Tone controls for every occasion
The high-pass, low-pass, subsonic filter, bass boost, and gain controls sit protected under a top panel. Their intuitive operations and functions make it easy to match the amp's output to your speakers and sub — and achieve a great sound. This amplifier's modest exterior shelters high-quality electronic components that guarantee an accurate and musical performance.
Product Features:
- 5-channel auto amplifier
- 70 watts RMS x 4 + 350 watts RMS x 1 into 4 ohms
- 100 watts RMS (4 x) + 550 watts RMS (1 x) into 2 ohms
- 200 watts RMS x 2 bridged into 4 ohms + 550 watts RMS x 1 into 2 ohms
- Class-AB design for the front and rear channels, Class-D for the sub channel
- 100 dB signal-to-noise ratio, 0.05% distortion on the front and rear
- channels, 0.15% distortion on the sub-channel
- variable high and low pass filters (40-400 Hz, 12 dB/octave) on front and rear channels
- variable low-pass filter (40-220 Hz, 12 dB/octave) on the sub-channel
- variable bass boost (0-12 dB at 45 Hz) on the sub channel
- switchable subsonic filter (off, 25, 35 Hz) on the sub channel
- preamplifier and loudspeaker inputs
- speaker level inputs require adapter from the speaker cable to RCA
- Loudspeaker level inputs feature DC offset or signal-controlled turn-on
- optional wired bass remote control MPS-R1 available soon
- wiring, fuse and hardware not included with the amplifier
- 25mm² power and ground cable and 80 amp fuse recommended
- 48.9cm x 5.7cm x 17.1cm
- UK Internet Dealer
- Full Manufacturer's Warranty
What's in the box:
- 5-Channel amplifier
- Four 5/8" Screws
- Two M4x4mm Machine screws (top panel replacement screws)
- 2mm Allen wrench
- 2.5mm Allen wrench
- 4mm Allen wrench
- Owner's manual
| Price | £799.99 |
|---|---|
| Manufacturer | Morel |
| Vehicle Manufacturer | None |
SEE OTHER PRODUCTS BY Morel