SEE OTHER PRODUCTS BY InCarTec
Connects2 SWC.2 Steering Wheel Control Interface Adaptor plug and play installation. Connecting to the original radio connector and plugging in to the back of the new head unit is simple to fit.
A stalk/steering wheel control adaptor enables you to utilise the original factory remote audio (whether built onto steering wheel or fitted on a stalk next to the steering wheel) with an aftermarket unit.
Included Free Stereo Patch Lead
Compatibility:
| ake | Model | Years | Notes |
| Land Rover | Discovery | 1998 - 2004 | II (L318) |
| Land Rover | Freelander | 1997 - 2003 | I (L314) |
| Rover | 75 | 1999 - 2004 |
Car Audio Steering wheel interface and ISO cables allowing use of original buttons with a new aftermarket head-unit. Provides power and speaker connections from the car.
Suitable for Landrover Discovery II, Freelander I (2001-2003) and Rover 75 car models (With BMW round pin wiring)
PLEASE NOTE: The single loose wire on this harness will need to be connected to pin two of the 6way white connector under the steering column
Features & Benefits
- Allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steering wheel controls
- Safety: Allows you to keep your hands on the steering wheel and eyes on the road.
- Plug and play, no cutting of wires required
- Maintains the original features of the vehicle such as date, time and temperature display
- Choose the relevant head unit connection lead according to the make of aftermarket head unit you wish to fit
- For interfaces where phone buttons are supported, the following brands allow pick up/hang up in Bluetooth mode
PATCH LEAD This interface connects a compatible car stereo with a joystick input (blue line-in mini-jack) or wire input on the back of the unit to the existing stalk/steering wheel controls of the vehicle.
Universal head unit connection lead for:
- Alpine (3.5mm jack)
- Beat (single wire connection)
- Chinese / Xtrons / 3 wire unbranded units (3 wire connection)
- Clarion (3.5mm jack)
- JVC (3.5mm or single wire)
- Kenwood (single wire)
- LG (3.5mm jack)
- Nakamichi (single wire connection)
- Panasonic (single wire but NOT AV units)
- Philips (single wire connection)
- Pioneer (3.5mm jack)
- Sony (3.5mm jack)
- Zenec (single wire)
- Other Chinese SWC learning head units
Notes:
- You can simply cut the loops / wires to select which brand you are fitting.
- Supplied with instruction sheet
Please note: This patch lead CANNOT be used for Blaupunkt / Parrot / Becker / JVC KW-AVX head units / Older Kenwood units with the DIN plug. For those models you need to purchase the lead from the add-on options.
| Price | £59.99 |
|---|---|
| Manufacturer | InCarTec |
| Vehicle Manufacturer | None |
SEE OTHER PRODUCTS BY InCarTec