SEE OTHER PRODUCTS BY Alpine
Car Setup Menu Display and Control
The key point when removing any factory radio is to ensure, that the vehicle setup menu can still be accessed. Alpine makes it very easy and convenient: all settings can be conveniently displayed and touch-controlled in the settings section of your Alpine Head Unit.
Parking Sensors Display
If your T6.1 is equipped with original parking sensors, you can continue to use this convenient feature when upgrading to an Alpine Halo system. The parking sensor system is connected to your Alpine screen, showing a convenient distance display.
Pre-Flight Check
Most damages to motorhomes occur, because the vehicle was not fully prepared for the road. Alpine's on-screen Pre-Flight Check can be fully customized to your vehicle and reminds you before you start driving, to ensure that the gas is shut off, all tables and doors are secured, satellite antennas are retracted, etc.
Steering Wheel Remote Control
Unlike other manufacturers, the Alpine system is fully compatible with the Volkswagen T6.1's steering wheel control buttons, including telephone accept & decline buttons including SIRI and OK Google support.
Air Condition/Heating Display
The Alpine Halo unit gives you visual feedback for the selected temperature of driver and co-driver, AC status, seat heating level, selected air vents and more. This screen will automatically appear for a few seconds when any of the named settings is changed to give the driver feedback.
Multi-Function Display (MFD) Support
The KIT-F9VW-T61 supports the Multi-Function Display (MFD) in the instrument cluster. When connected to an Alpine Head Unit, the MFD will display radio station names, song titles and artist information, caller names, navigation turn-by-turn arrows and other useful information.
Note: Navigation turn-by-turn arrow support in the MFD will become enabled for the INE-F904D / INE-F904DC in early 2024. Please ask you Alpine dealer for further information.
Compatible with many Alpine Head Units
The KIT-F9VW-T61 is compatible with all Alpine Halo Head Units ( iLX-F115D , iLX-F905D ) and Halo navigation systems ( INE-F904D , INE-F904DC ) that are “Vehicle Data-Bus Interface Ready”.
Compatible with Original VW Reversing Camera
You can continue to use your original Volkswagen reversing camera with the KIT-F9VW-T61.
Compatible with Original VW Microphone
The KIT-F9VW-T61 is compatible with your original Volkswagen hands-free microphone. This makes the installation faster and cleaner, since no additional microphone has to be installed.
You can even retain the vehicle settings function and adjust all car settings from your Alpine head unit. The cable harness uses Power-Quadlock connectors for simple plug-and-play installation and is fully compatible with the original vehicle hands-free microphone and rear-view camera.
- CAN to UART interface with SWRC (SIRI Ready) and instrument multi-function display (MFD) support
- Visual Parking Display (PDC) and air-conditioning / heating display support
- CAN to analog conversion for ignition (ACC signal), parking brake, speed pulse and reversing signal
- Retention of original vehicle settings (interface settings adjustable in Alpine head unit)
- Alpine vehicle-specific connection harness with Power-Quadlock connector
- Retention of HVAC (Heating, Ventilation and Air Conditioning) and OPS (Optical Parking Sensor) display (if original available)
- SIRI and OK Google support
- Supports original vehicle microphone and rear camera
- Including antenna adapter with phantom feed
- Compatible Cars: Volkswagen T6.1 (7H / 7J) 11/2019 – 2022
Note:
- FOR VEHICLES WITH ORIGINAL eCALL: CAN bus interface to maintain the eCall function when replacing the OEM radio is needed.
- Please note that vehicle menus may be lost (e.g. traffic sign recognition etc.). A few other functions or settings are retained but may be controlled in a different way
Compatible Cars
| Price | £299.99 |
|---|---|
| Manufacturer | Alpine |
| Vehicle Manufacturer | Volkswagen |
SEE OTHER PRODUCTS BY Alpine