Kicker LX500.4 1100W Peak (900W RMS) Class D LX Series 4-Channel Full Range Car Amplifier (with Control Center)

Tune it in and turn it up

Built like a tank packed with sound-shaping capabilities and ready for action, Kicker's LX500.4 multi-channel amplifier features customizable digital signal processing and high output power, so you'll experience high-quality enjoyment every time you listen to a song. The amp looks as good as it sounds, sporting adjustable RGB accent lighting and a slick reversable cover plate displaying the Kicker logo.

Fits in with factory systems

This LX-Series amplifier features Kicker's FIT+™ technology, which enables it to easily integrate into almost any factory stereo, and comes with high-level speaker wire input adapters to simplify installation. The amp's gain controls feature built-in clip lights which aid in setting the gain properly.

RMS Power

The LX500.4 has four powered output channels designed to drive four full-range speakers with 125 watts each. You can also bridge the front and rear amp channel pairs together to power two high-performance drivers with 450 watts RMS each for a competitive-level front stage stereo system.

LXCC DSP controller

LX Control Center digital processing

You won't need to use your laptop or phone or download any complicated DSP tuning app because the LX500.4 comes with an LXCC plug-in control console for dialing in and displaying the channel settings, tones, frequencies, timing, and other digital signal processing data needed to create the perfect sound. Tuning options include selectable crossover types and slopes, channel level balancing and fine-tuning, and time-delay for the left channels to match the right.

Specifications

• LX Series Class D 2 ohm Stable 4-Channel Amplifier
• RMS Power Rating:
• 4 ohm: 125 watts x 4 channel
• 2 ohm: 225 watts x 4 channel
• Bridged: 450 watts x 2 channel @ 4 ohm
• Total RMS power output: 900 watts
• LED Power/Protect Light
• 2 pairs of pre-amp outputs
• Speaker-level (high-level) inputs
• Reversible center panel and choose between 11 RGB LED accent colors
• Thermal, circuit and voltage stability protection
• Wired LX Control Center (LXCC) included
• Diagnostic readout for battery voltage, LED output clip indication, temperature and protection status
• Adjust gain trim, left-channel time delay, and selectable crossover type, slope and frequency
• Thermal, circuit and voltage stability protection
• Input sensitivity:
• Low level: 125 mV - 5 volts
• High level: 1 - 40 volts
• Frequency Response: 20 - 20000 Hz
• Total Harmonic Distortion (THD): <1%
• Signal to Noise Ratio: 75 dB
• Variable high-pass filter: 20 - 5000 Hz
• Variable low-pass filter: 40 - 5000 Hz
• Fuse Rating: 80A
• 4 AWG gauge amplifier wiring kit is recommended for installation
• Dimensions: 9-7/16" L x 8-7/16" W x 2-3/8" H
• UK Internet Dealer
• 1-year Manufacturer's Warranty
• MFR #:LX500.4

What's in the box: