Kicker LX1200.5 1500W Peak (1200W RMS) Class D LX Series 5-Channel Full Range Car Amplifier (with Bass Remote and Control Center)

Tune it in and turn it up

Built like a tank packed with sound-shaping capabilities and ready for action, Kicker's LX1200.5 multi-channel amplifier features customizable digital signal processing and high output power, so you'll experience high-quality enjoyment every time you listen to a song. The amp looks as good as it sounds, sporting adjustable RGB accent lighting and a slick reversable cover plate displaying the Kicker logo.

Fits in with factory systems

This LX-Series amplifier features Kicker's FIT+™ technology, which enables it to easily integrate into almost any factory stereo, and comes with high-level speaker wire input adapters to simplify installation. The amp's gain controls feature built-in clip lights which aid in setting the gain properly.

RMS Power

The LX1200.5 has five powered output channels designed to drive four full-range speakers with 125 watts each, and a subwoofer with up to 700 watts. You can also bridge the front and rear amp channel pairs together to power two high-performance drivers with 350 watts RMS each while still powering a sub with 700 watts.

LXCC DSP controller

LX Control Center digital processing

You won't need to use your laptop or phone or download any complicated DSP tuning app because the LX1200.5 comes with an LXCC plug-in control console for dialing in and displaying the channel settings, tones, frequencies, timing, and other digital signal processing data needed to create the perfect sound. Tuning options include selectable crossover types and slopes, channel level balancing and fine-tuning, and time delay for the left channels to match the right. There's also a KickEQ+™ parametric bass boost and phase control switch for the subwoofer channel.

Bass tuning and other remote features

After setup, you'll unplug the LXCC and plug in the amp's LXRC remote control. This wired remote controls the subwoofer level, and displays the system voltage, controls the amp's RGB brightness, and can add low-frequency content to bass-poor recordings using Kicker's SHOCwave2.0™ digital bass restoration algorithm.

LXRC bass knob

Specifications

• LX Series Class D 1 ohm Stable 5-Channel Amplifier
• RMS Power Rating:
• 4 ohm: 125 watts x 4 channel + 300 watts x 1 channel
• 2 ohm: 175 watts x 4 channel + 550 watts x 1 channel
• 1 ohm: 700 watts x 1 channel
• Bridged: 350 watts x 2 channel @ 4 ohm + 550 watts x 1 channel @ 2 ohm
• Total RMS power output: 1200 watts
• LED Power/Protect Light
• 4 pairs of pre-amp outputs
• Speaker-level (high-level) inputs
• Reversible center panel and choose between 11 RGB LED accent colors
• Thermal, circuit and voltage stability protection
• Wired LX Control Center (LXCC) included
• Diagnostic readout for battery voltage, LED output clip indication, temperature and protection status
• Adjust gain trim, left-channel time delay, and selectable crossover type, slope and frequency
• Wired LX Remote Control (LXRC) included
• Dynamic fingertip dash remote of bass level adjustment
• Features SHOCwave2.0 (Sub-Harmonic Octave Creation)
• Digital bass restoration algorithm recovers low-bass frequencies
• Displays battery voltage in fuel-gauge-style readout
• Control of RGB LED brightness
• Output clipping indicator to prevent distortion
• Thermal, circuit and voltage stability protection
• Input sensitivity:
• Low level: 125 mV - 5 volts
• High level: 1 - 40 volts
• Frequency Response: 20 - 20000 Hz
• Total Harmonic Distortion (THD): <1%
• Signal to Noise Ratio: 75 dB
• Variable high-pass filter: 20 - 5000 Hz (Channels 1-4)
• Variable low-pass filter: 40 - 5000 Hz (Channels 1-4) / 40 - 160 Hz (Channel 5)
• Subsonic filter: 10 - 80 Hz
• Variable Bass Boost: 0 - 6 dB
• Fuse Rating: 100A
• 1/0 AWG gauge amplifier wiring kit is recommended for installation
• Dimensions: 12-5/8" L x 8-7/16" W x 2-3/8" H
• UK Internet Dealer
• 1-year Manufacturer's Warranty
• MFR #: 51LX13007

LX Control Center (LXCC) Specifications:

• Monitor battery voltage, LED output clip indication, amp temperature, and protection status
• Adjust gain trim, left-channel time delay, and selectable crossover type, slope, and frequency
• Allows for both HP, LP or BP crossovers for all full-range channels
• 0-6dB with adjustable center frequency and Q for the sub channel

LX Remote Control (LXRC) Specifications:

• Dynamic fingertip dash remote of bass level adjustment
• Features SHOCwave2.0 (Sub-Harmonic Octave Creation)
• Recovers lost, low-bass frequencies vital to your music selections
• Displays battery voltage in a fuel-gauge-style readout
• Control of its RGB LED brightness
• Output clipping indicator to prevent distortion and protect your system

What's in the box: