YOU MAY NEED
SEE OTHER PRODUCTS BY Kicker
Delivers super-size bass with style
Great bass requires serious power — it's a basic law of nature. And Kicker's KXA1200.1 mono subwoofer amplifier will definitely give you great bass, powering your subs with up to 1,200 watts RMS. This reliable and compact KX Series rocker remains cool even when pushed hard, thanks to its high-mass heatsink, high-tech internal components, and the efficient Class-D amp technology. And the amp will work with a 1-ohm load, so it can get used in a wide variety of subwoofer configurations.
Connection perfection
Kicker employs their Fail-Safe Integration Technology (FIT2™) to reject noise and stop any interference generated by your car's electronics, so you'll enjoy your music clean and pure. Speaker-level inputs make it possible to hook this amp up to almost any stereo, even a factory system. Kicker also helps you set this amp's gain properly, by offering free test tones for downloading. You play a tone and turn the gain up until the gain knob glows red. Then, you turn it down until it just goes out, and the amp's gain is set perfectly.
Very cool wireless remote
A KXARC Bluetooth® wireless remote control comes with this amplifier, so no more running a wire from the amp to your remote. From the driver's seat, you can adjust the level of the subwoofer, add bass using Kicker's SHOCwave™ bass restorer, switch sub phase, and get a warning when the sub signal clips.
Bass controls behind the folding door
You can tune for almost any enclosure and sub, using the steeply-sloped low-pass and subsonic filters to keep the signal clean. A parametric KickEQ™ lets you choose a bass frequency to boost and also how many notes above and below that center frequency you can boost along with it.
KXA1200.1 control panel
Product Features:
- Kicker KXA1200.1
- Class-D 1-Ohm Stable Monoblock Amplifier
- RMS Power Rating:
-
- 4 ohms: 800 watts x 1 chan.
- 2 ohms: 1600 watts x 1 chan.
- 1 ohm: 1600 watts x 1 chan.
- Total power output: 1600 watts
- CEA-2006 Compliant Amplifier
- Wireless KXARC remote included to control gain, SHOCwave bass restoration, phase control and clip monitoring
- LED power (green) and protect (red) indicators
- Soft start turn-on
- Mono channel operation
- Speaker-level (high-level) inputs
- Preamp RCA outputs to daisy chain multiple amps
- 3-way protection circuitry (thermal, overload, and speaker short protection)
- Dual speaker terminals simplify the hookup of multiple speakers
- Heavy duty aluminum alloy heat-sink
- Input sensitivity:
-
- High level: 250mV-10V
- Frequency Response: 10 - 160 Hz x 1 chan.
- Total Harmonic Distortion (THD): 1%
- Signal to Noise Ratio: >95 dB
- Variable low-pass filter: 40 - 160 Hz, 24 dB/octave
- Subsonic filter: 10 - 80 Hz , 24 dB/octave
- Variable Bass Boost: 0 to +18 dB bass boost at 50 Hz
- External Fuse Rating: 150 A x 1
- 1/0 gauge power and ground wiring is recommended for installation.
- Dimensions: 8-5/16"W x 11-3/16"L x 2-1/8"H
- Also found as: KXA 1200.1, KXA12001, KXA1200 1, Kicker monoblock amp
- UK Internet Dealer
- 1-year Manufacturer's Warranty
What's in the Box:
- Mono-block amplifier
- KXARC remote control
- Surface mount cup
- Bezel
- 2 Mounting brackets
- 2 Self-tapping screws (length 1")
- 3mm Allen wrench
- 4 Self-tapping screws (length 2")
- 4 Flat washers
- Owner's Manual
- Kicker Certified Power certificate
Related Products:
| Price | £549.99 |
|---|---|
| Manufacturer | Kicker |
SEE OTHER PRODUCTS BY Kicker