Tune it in and turn it up
Built like a tank packed with sound-shaping capabilities and ready for action, Kicker's LX850.1 mono subwoofer amplifier features customizable low-frequency signal processing and high output power, so you'll experience high-quality enjoyment every time you listen to a song with a beat. The amp looks as good as it sounds, sporting adjustable RGB accent lighting and a slick reversable cover plate displaying the Kicker logo.
Fits in with factory systems
This LX-Series amplifier features Kicker's FIT+™ technology, which enables it to easily integrate into almost any factory stereo, and comes with high-level speaker wire input adapters to simplify installation. The amp's gain control features a built-in clip light which aids in setting the gain properly.
RMS output power
The LX850.1 has power to drive a 4-ohm sub with 300 watts, a 2-ohm sub with 500 watts, or a 1-ohm sub with 850 watts RMS.
Bass tuning and remote features
Low-pass and subsonic crossover filters adjust the bass signals to match your sub and its installation, while the KickEQ+™ parametric bass boost and phase switch maximize its sonic impact. The amp's LXRC remote controls the subwoofer level, displays the system voltage, controls the amp's RGB brightness, and can add low-frequency content to bass-poor recordings using Kicker's SHOCwave2.0™ digital bass restoration algorithm.
Bass tuning and other remote features
After setup, you'll unplug the LXCC and plug in the amp's LXRC remote control. This wired remote controls the subwoofer level, and displays the system voltage, controls the amp's RGB brightness, and can add low-frequency content to bass-poor recordings using Kicker's SHOCwave2.0™ digital bass restoration algorithm.

LXRC bass knob
Specifications
- LX Series Class D 1 ohm Stable Monoblock Amplifier
- RMS Power Rating:
- 4 ohm: 300 watts x 1 channel
- 2 ohm: 500 watts x 1 channel
- 1 ohm: 850 watts x 1 channel
- Total RMS power output: 850 watts
- LED Power/Protect Light
- Wired bass level remote control included
- Speaker-level (high-level) inputs
- 1 pair of pre-amp outputs
- Signal sensing remote turn-on
- 3-way protection circuitry (thermal, overload, and speaker short protection)
- Comes with the LX Remote Control (LXRC)
- Gain-match LEDs show you perfect gain setting
- Customize appearance with 11 RGB LED using reversible center
- FIT+ technology, accepting lo/hi-level signals up to 40V
- Input sensitivity:
- Frequency Response: 10 - 160 Hz
- Total Harmonic Distortion (THD): <1%
- Signal to Noise Ratio: >75 dB
- Variable low-pass filter: 40 - 160 Hz
- Subsonic filter: 10 - 80 Hz
- Variable Bass Boost: 0 - 6 dB
- Fuse Rating: 80A
- 1/0 AWG gauge amplifier wiring kit is recommended for installation
- Dimensions: 9-7/16" L x 8-7/16" W x 2-3/8" H
- UK Internet Dealer
- 1-year Manufacturer's Warranty
- MFR #: 51LX13007
LX Remote Control (LXRC) Specifications:
- Dynamic fingertip dash remote of bass level adjustment
- Features SHOCwave2.0 (Sub-Harmonic Octave Creation)
- Recovers lost, low-bass frequencies vital to your music selections
- Displays battery voltage in a fuel-gauge-style readout
- Control of its RGB LED brightness
- Output clipping indicator to prevent distortion and protect your system
What's in the box:
- 7-Channel amplifier
- LXCC Control Center with attached 39" cord (terminated in an RJ-45 connector)
- LXRC Remote bass control with attached mounting bracket
- 19.5' Remote bass control cable (terminated in RJ-45 connectors on both ends)
- 10" Speaker-level input harness
- Four 1-3/8" screws
- Two 3/8" screws
- 3mm Allen key
- Owner's manual
- Power chart
- Power certificate
Price | £499.99 |
---|---|
Manufacturer | Kicker |
Vehicle Manufacturer | None |