Kicker 44KXMA1200.1 1200W RMS KM Series 2-ohm Stable 1 Channel Class-D Marine Amplifier

Delivers king-size bass with style

Kicker's KXMA1200.1 marine subwoofer amplifier will power your subs with up to 1,200 watts RMS. This reliable and compact KXM Series rocker remains cool even when pushed hard, thanks to its high-mass heatsink, high-tech internal components, and the efficient Class-D amp technology. And the amp's stable for a one-ohm load, so it can get used in a wide variety of subwoofer configurations.

Made for marine use

The KXMA1200.1 features a conformal-coated circuit board for improved water and dust resistance, plus corrosion-resistant power connections, a gasket-sealed front cover, and stainless steel mounting hardware that won't rust all over your boat's gel coat or carpeting.

Connection perfection

Kicker employs their Fail-Safe Integration Technology (FIT2™) to reject noise and stop any interference generated by your boat's electronics, so you'll enjoy your music clean and pure. Speaker-level inputs make it possible to hook this amp up to almost any receiver or radio. Kicker also helps you set this amp's gain properly, by offering free test tones for downloading. You play a tone and turn the gain up until the gain knob glows red. Then, you turn it down until it just goes out, and the amp's gain is set perfectly.

Very cool wireless remote

Kicker's unique KXARC Bluetooth® wireless remote control comes with this amplifier. So from your pilot's seat, you can adjust the level of the subwoofer, add bass using the SHOCwave™ bass restorer, switch sub phase, and get a warning when the sub signal clips.

Bass controls behind the folding door

You can tune for almost any enclosure and sub, using the steeply-sloped low-pass and subsonic filters to keep the signal clean. A parametric KickEQ™ lets you choose a bass frequency to boost and also how many notes above and below that center frequency you can boost along with it. 

KXMA1200.1 control panel

Product Features:

• Kicker KXM Series KXMA1200.1 (44KXMA12001)
• Class-D 1-Ohm Stable Monoblock Amplifier
• RMS Power Rating:
• • 4 ohms: 600 watts x 1 chan.
  • 2 ohms: 1200 watts x 1 chan.
  • 1 ohm: 1200 watts x 1 chan.
    Note: 2017 KXM amplifier subwoofer channels are 1Ω stable
    power rating equivalent to 2Ω operation, +/- 10%
• CEA-2006 Compliant Amplifier
• Pulse Width Modulated MOSFET power supply
• KXARC Wireless Remote Included
• Speaker-level (high-level) inputs: Kicker KISL requires, sold separately
• Gain Control With "Optimal Input" Indicator
• SHOCwave™ Bass Restoration Processor
• FIT2™ (Fail-Safe Integration Technology) Circuitry
• DSP-Controlled Preamp
• ABYC/NMMA Compliant Power Terminals
• Conformal-Coated Circuit Boards
• Easy Access to Settings behind Gasket-Sealed Cover Panel
• Black Anodized Aluminum Chassis
• Stainless Steel Mounting Hardware Included
• LED power (green) and protect (red) indicators
• Soft start turn-on
• Preamp RCA outputs to daisy chain multiple amps
• 3-way protection circuitry (thermal, overload, and speaker short protection)
• Dual speaker terminals simplify the hookup of multiple speakers
• Heavy duty aluminum alloy heat-sink for extreme heat dissipation
• Input sensitivity: 250mV - 10V
• Frequency Response: 10 - 160 Hz
• Total Harmonic Distortion (THD): ≤1%
• Signal to Noise Ratio: >95dB
• Variable low-pass filter: 40 - 160 Hz, 24 dB/octave
• Subsonic filter: 10 - 80 Hz , 24 dB/octave
• KickEQ+™ Parametric Bass Boost:
• • Boost - Variable 0-18db
  • Center Frequency - 20Hz-80Hz
  • Bandwidth 1-5
• Fuse Rating: 150A x 1 External Fuse (sold separately)
• 4 gauge power and ground wiring is recommended for installation. 
• Dimensions: 8-5/16"W x 9-9/16"L x 2-1/8"H
• UK Internet Dealer
• 1-year Manufacturer's Warranty

Related Products:

•   Amp Wiring Kit