Kenwood XH401.4 - Hi-Res Audio Class D 4 Channel Power Amplifier 75W x 4 RMS
Kenwood XH401-4 Amplifier Hi-Res AudioThe power amplifiers of the XH series are capable of also reproducing frequencies in the range above the usual 20 kHz, in order to reproduce high-resolution audio data in the full bandwidth and with all details. In combination with a particularly low S / N level, high-quality recordings can be reproduced with the XH series on an impressive level.
High-level inputs and automatic switch-on The XH series amplifiers can also be connected directly to the high-level outputs of an existing Cinch cable preamplifier input Connect car radios. As soon as the signal thus obtained is present, the amplifier switches on automatically and is thus not dependent on its own control line for switching on.
Product Features:
Key Features
- Class D 4-Channel Power Amplifier
- CEA-2006 compliant
- Hi-Res Audio compliant
- 75W x 4 RMS power output
- Frequency Response 20Hz - 50kHz
- Variable High-Pass Filter
- Variable Low-Pass Filter
- Speaker level input
- Signal sensing turn-on
- Wired remote included for B-channel
Amplifier Features
- Class D Amplifier
- Load Capability 2Ω Stable
- Rated power output (4Ω) 75W x 4 (4Ω)
- Rated power output 75W x 2 + 200W x 1 (4Ω)
- Bridged power output (4Ω) 200W x 2
- CEA-2006 Compliant
- Low-pass Filter
- High-pass Filter
- Switched Mode Power supply
- Power Indicator Multifunctional
- Signal Sensing Turn-on
- Protection function
- Line in 4 RCA / Speaker level
- Input Selector A/AB
- Speaker level input via line-in (RCA) A-ch & B-ch
- Single Side Terminals
- Chassis Aluminum Die-cast
Amplifier-Specifications
- Rated power output (4Ω, 14,4V) 75W x 4 (20Hz ~ 20000Hz, 1%THD)
- Rated power output (2Ω, 14,4V) 100W x 4 (1000Hz, 1%THD)
- Rated power output (4Ω, 14,4V) 200W x 2 (1000Hz, 1%THD)
- Rated power output (CEA-2006)
- 75Watts RMS x 4 at 4 ohms and 1% THD
- Low-pass Filter 50~200Hz (-12dB/oct)
- High-pass Filter 50~200Hz & 2,5~10kHz (-12dB/oct)
- RCA Input Sensitivity 0.2 ~ 5V
- Speaker Level Input Sensitivity 4 ~ 12V
- Input Impedance 10kΩ
- Signal to Noise Ratio 100dB
- Signal to noise ratio (CEA-2006)
- 76dBa (Reference: 1 Watt into 4 Ohms)
- Frequency response (+0dB, -3dB) 20Hz ~ 50000Hz
- Frequency response (+0dB, -1dB) 20Hz ~ 40000Hz
- Operating voltage 14.4V (11V ~ 16V allowable)
- Maximum current consumption 37A
- Dimensions (WxHxD) 220 x 35 x 169(mm),
- Weight 1.5kg
What's in the box:
- 4-Channel amplifier
- Two 30-amp ATM mini blade fuses (installed)
- Wired Remote Commander
- Flat washer
- Hex nut
- 20' Remote cable (RJ-14 modular plugs on each end)
- 4mm Allen wrench
- 2.5mm Allen wrench
- Four 5/8" Self-tapping screws
- Instruction manual (English/ French/ Spanish)
- Warranty card
Price | £329.99 |
---|---|
Manufacturer | Kenwood |
Vehicle Manufacturer | None |