JL Audio RBC-1 Remote Bass Level Control for JD, JX, MX, RD Series Amplifiers

JL Audio amplifiers feature bass-boost circuitry to help you adjust low-frequency impact in your vehicle. The RBC-1 wired remote bass control works with all of JL Audio's A-Series, G-Series, RD Series, mono JX-Series, and most Slash v2 amps. You can mount the RBC-1 controller in the front of your vehicle and dial in the amount of bass you want from the driver's seat — mounting instructions, hardware, and a 18' cable are included.

Connect the RBC-1 to your amp, and it converts the amp's selectable bass boost (0 or 6 dB) to a variable boost (0 to 12 dB). With the Slash v2 amps, the RBC-1 takes the place of the amp's boost knob, allowing you to adjust your bass boost from 0 to 15 dB. With RD Series and JX-Series mono amps, the RBC-1 controls the amp's subwoofer level, from full mute to full volume.

Remote Bass Control for Select JL Audio Amplifiers

The RBC-1 remotely controls the Bass Level of the following JL Audio amplifiers:

JD-Series,  JX-Series, HX-Series, MHX-Series and RD-Series

When the RBC-1 is connected to the above amplifiers, it acts as an attenuator on the input gain of the amplifier and is used to adjust the overall level of the amplifier from the front of the vehicle.

The RBC-1 remotely controls the Bass EQ boost feature of the following JL Audio amplifiers:

JD-Series: JD250/1, JD500/1, JD1000/1
JX-Series: JX250/1, JX250/1D, JX500/1, JX500/1D, JX1000/1D
HX-Series: HX300/1 in Low Pass Mode (Note: M-RBC-1 is also available)
MHX-Series: MHX300/1 in Low Pass Mode (Note: M-RBC-1 is also available)
MX-Series: MX300/1, MX500/1 in Low Pass Mode (Note: M-RBC-1 is also available)
RD-Series: RD500/1, RD1000/1, RD1500/1, RD900/5

When the RBC-1 is connected to the above amplifiers, the on-board "Boost" control of the amplifier is defeated and the RBC-1 becomes the active controller.

The RBC-1 kit includes the rotary control with a black ABS knob, mounting hardware and one 18 ft. (5.5 m) cable.

A satin-finish aluminum knob can be purchased separately.

Product Features:

• Remote Bass Control
• Adjust the overall level of the amplifier from the front of the vehicle
• Intended to be Flush Mounted
• Low-profile design for custom-look installations
• Includes 18 ft. control cable
• Black ABS Knob
• Black plastic replacement knob available, sold separately: JL Audio Black Knob
• Satin-Finish Aluminum replacement knob available, sold separately: JL Audio Aluminum Knob
• Mounting hardware included
• Also found as: SKU # 98015
• UK Internet Dealer
• Manufacturer's Warranty

What's in the box: