JL Audio CP212-W0v3 BassWedge™ slot-ported enclosure with two 12" W0v3 subwoofers

JL quality at a great price

JL Audio built the BassWedge CP212-W0v3 enclosure to make car-rattling bass for a reasonable price, without the need for a ton of power. The enclosure's designed to match the two 12" subs loaded into it, so you know you'll get every ounce of performance out of this enclosure.

An excellent combination

The CP212-W0v3 BassWedge contains two 12" W0v3 subwoofers that handle up to 600 watts RMS, and are loaded into a specially built slot-ported enclosure. The enclosure can be placed with the woofers firing downwards, or in typical front or rear firing applications, giving you immense bass regardless of how you place it.

Solid MDF enclosure

JL Audio uses state-of-the-art automated woodworking equipment to fabricate the high-quality MDF enclosure with rugged automotive carpeting, nickel-plated push terminals, and solid internal wiring.

Product Features:

• 12" W0v3 Series Subwoofer
• Manufacturer preloaded with two JL Audio 12W0v3-4 Subwoofers!
• Power Handling:
• Recommended Power Range: 150 - 800 watts total
• Nominal Impedance: 2-Ohms
• Mineral-filled, polypropylene cone woofer for excellent durability
• Large roll surround for generous amounts of excursion
• Elevated frame cooling brings air directly to the voice coil
• Designed for compact sealed enclosures or medium-sized ported enclosures
• Large excursion for louder bass and less distortion
• DMA Optimized motor system reduces distortion and tight, clean bass
• Lead wire woven into spider for added strength
• Metallic silver frame finish
• 2.0" High-temperature voice coil
• Sensitivity: 85.64 dB
• Xmax: 11.4 mm
• Reference Efficiency (no): 0.2200%
• Frequency response: ~22 ~ 250 Hz
• Black Steel-Mesh Grille Insert Available: JL Audio SGRU-12
• Matching Amplifier:
• JL Audio XD600/1v2
• JL Audio JX500/1D
• UK Internet Dealer
• Full Manufacturer's Warranty

General Specifications:

• Injection-molded, mica-filled polypropylene cone
• Rubber surround
• No pole vent: permits mounting close to the rear wall of the enclosure
• DMA-optimized motor design
• Patented concentric tube architecture
• Patented floating cone attach method technology
• Cast alloy frame with flat edges for tight driver grouping
• Construction: CNC-Cut High-Grade MDF
• One-Way Linear Excursion (Xmax): 0.40 in / 10.0 mm
• Sensitivity: 82.2 dB 1 watt / 1 meter 

Enclosure Features:

• 12" Slot Ported MDF Subwoofer Enclosure
• Loaded with two 12W0v3 12" subwoofers
• Designed for forward, rear or down-firing installation
• Top-quality MDF construction
• Durable dark gray carpet finish
• Five-Way binding post connectors
• Embroidered JL Audio logo
• Embroidered "Slot-Ported BassWedge" logo on the port mouth
• 2 Ohm final impedance
• Dimensions: 15-3/4"TD x 20-5/16"BD x 31-3/8"W x 15-3/16"H