JL Audio C3-650 Evolution C3 Series 6.5" convertible component speaker system

JL Audio's Evolution C3 speaker systems allow you to choose the best configuration for great sound in your vehicle. Mount the woofers and tweeters separately, and a C3 component system will fill your car with incredibly detailed, rich, and crystal-clear music, perfectly positioned in your listening space. In vehicles with limited space, you can mount the C3 tweeter inside the woofer to create a full-range, coaxial speaker that still performs with breathtaking impact.

Advanced material construction leads to clean musical reproduction

The C3-650 component system uses a 6.5" mica-filled polypropylene woofer that covers the midrange and low frequencies strongly and accurately. A specially designed frame resists unwanted resonances, keeping your music free from interference. If you mount the tweeter separately, simply install a phase plug into the woofer and the sound will disperse smoothly throughout your vehicle.

Silk tweeters and versatile crossover networks

The C3 tweeters use ferrofluid cooling to handle extreme levels of high-frequency information without overheating. Mounted separately or coaxially, these 1" silk dome tweeters broadcast crisp musical detail evenly without harshness. Separate, outboard crossovers use premium components to direct the signal flow to your woofers and tweeters. You can select from three midrange settings and four levels of tweeter presence to match the speaker system to your listening environment.

Product Features:

• 6.5" Evolution C3 Series 2-way Convertible Car Speakers
• Power Handling:
• Peak: 450 watts per set / 225 watts each side
• RMS: 150 watts per set / 75 watts each side
• Recommended Power Range: 25 - 150 watts per channel
• Mineral-Filled Polypropylene Cone
• Butyl Rubber Surround
• Injection-molded Polymer Basket
• 1.20" Voice Coil on Kapton Former
• Low-Profile, Symmetrical Roll Spider
• Ferrite Woofer Magnet
• 1.0" Silk Soft Dome Tweeter
• Elevated Frame Cooling
• Convertible Drivers: Coaxial or Component
• Dynamic Motor Analysis (DMA) Optimized Motor
• Ferrofluid Cooling/Damping Neodymium Tweeter Magnet
• Fixed Angle Flush-Mount, Surface-Mount and Coaxial-Mount Systems (Tweeter)
• 2-way crossover networks with 1st order low-pass and 2nd order high-pass filters
• Premium Mylar Capacitors w/ Air-Core Inductors
• 4-Position Adjustable Tweeter Output Level
• 3-position Mid-range Presence Control
• Polyswitch tweeter protection
• Black steel mesh grille with an electroformed JL Audio logo Included
• Woofer Dimensions:
• Tweeter Dimensions: (Flush Mount)
• Crossover Dimensions:
• Nominal Impedance: 4 ohm
• Efficiency: 90.0 dB @ 1 watt / 1 meter
• Frequency Response: 48 Hz - 25 KHz ± 3 dB
• UK Internet Dealer
• Full Manufacturer's Warranty

What's in the box: