In Phase IPA8704D 2 Ohm Stable 1200 Watts Digital 4 Channel Amplifier

In Phase 2 Ohm Stable 1200 Watts Digital 4 Channel Amplifier - In Phase Car Audio IPA8704D

Car amplifiers are the heart of a system and need be of the best quality available for your budget. All Inphase IPA car amplifiers are hand assembled and go through 35 different checkpoints to ensure you get the best possible car amplifier today. 

With One and Two OHM stable designs, tri-mode capability and clever protection circuits, these hand-built powerhouses will take anything you throw at them. Massive heat sinks with a high surface area to volume ratios and cast end caps to hide the wiring connections and keep things controlled – helped by forced air cooling on the real bass monsters. 

The newly designed IPA8701D, IPA8704D, IPA9701D and IPA9704D now incorporate digital technology into their design, these amps are direct competition to the Pioneer GM-D amplifiers.

The IPA series amplifiers are designed for performance in a performance build. So there is no speaker level input, these are designed to fit with an aftermarket headunit. But you do not need to panic, you can use a line out converter to fit this amplifier to your factory system. For fitting the IPA series amp to a factory system we advise using the In Phase SRCAPro or for higher performance, the In Phase SRC6.

British Design 

All In Phase amps are designed in the UK utilising over 30 years of audio experience to create a sound that is right for you. 

To prevent the circuit shutdown, In Phase's new digital amplifier circuit, senses its internal temperature and automatically moderates the input level accordingly. Stable, durable circuitry lessens the risk of high input power for the unit to achieve 1 Ω

Product Features:

• 100W RMS x4 @ 4 ohms
• 150W RMS x4 @ 2 ohms
• 300W RMS x2 (2 Channels Bridged) @ 4 ohms
• 1200 Watts Max Power
• Regulated power supply
• MOSFET power supply
• Oversize Power Transformer
• Bipolar Output devices
• Dimensions (L x W x H) 280mmx 250mm x 55.5mm
• Variable gain adjustment
• Variable cross over (high/low pass)
• Thermal protection
• Overload protection
• 2 ohms Stable
• Low pass filter frequency 50Hz - 250Hz. Cut off -12dB/oct
• High pass filter frequency 50Hz - 1.2kHz. Cut off -12dB/oct

• 100W RMS x4 @ 4 ohms (At 14.4V. 4 Ohm 20Hz to 20kHz. > 1% THD)
• 150W RMS x4 @ 2 ohms (At 14.4V. 2 Ohm 20Hz to 20kHz. > 1% THD)
• 300W RMS x2 @ 4 ohms (At 14.4V. 4 Ohm 20Hz to 20kHz. > 1% THD)
• 1200 Watts Max Power
• Load Impedance- 2 ohm to 8 ohm
• Average Current Consumption 1.3A (4 ohm for one Channel)
• Average Current Consumption 1.5A (2 ohm for one Channel)
• Average Current Consumption 2.5A (1 ohm for one Channel)
• Fuse- 40A x3
• Maximum input level/impedance 6V/22K ohm