SEE OTHER PRODUCTS BY Hertz
Born of Legend
MP 28.3 Mille Pro 28 mm diameter tweeter component inheriting all the technological features of the Mille Legend ML28.3. The geometry of the Tetolon dome maximizes the typical dispersion of off-axis listening. The rear acoustic chamber with damping material contributes to extend response to lower frequencies achieving a resonance frequency of only 900 Hz. In this way the crossover point between tweeter and woofer can be lowered, improving the sound image in the car dashboard. The massive Neodymium motor minimizes nonlinearity managing the music program with very dynamic transients. The CCAW (Copper Clad Aluminium Wire) voice coil guarantees the especially light weight and stiff moving assembly. These technological elements interact with each other, resulting in a high-frequency extension of 28kHz, a record for a tweeter featuring a 28mm voice coil. An elegant and compact angled tweeter support is provided with the tweeter: this allows easy installation both on the A-pillars and on the car dashboard. The correct angle of the tweeter improves the stereo image, essential for an engaging listening.
Hertz includes hardware for a variety of mounting options to ensure the best fit possible in your vehicle.
The Hertz philosophy
Hertz believes that a good speaker should reveal the emotional power of the music you love. That's a high bar, but with their commitment to using premium components and boundary-pushing design, they're more than up to challenge. Comprised of music lovers, Hertz is committed to optimizing your car's sound system for total audio enjoyment.
- Tetolon fiber soft dome, for natural yet detailed reproduction of musical nuances.
- Center Tuning Duct” geometry, for lower resonance frequency and reduced harmonic distortion.
- High-density flux Neodymium magnet, optimized for utmost control during high energy dynamic transients in the mid-high frequency range.
- 28mm ferrofluid-cooled mobile voice coil.
- Rear chamber filled with selected damping material and sized for lower Fs, to ensure a well damped high pass frequency roll-off, allowing low cut-off frequency crossover point.
- Faceplate featuring FEM (Finite Element Modeling) optimized geometry, for high linearity in off-axis installations.
- Wide array of installation accessories, for an easy OEM integration.
- Size mm (in.): 35 (1.38)
- Power Handling - Peak W: 180
- Impedance Ω: 4
- Frequency response Hz: 1k ÷ 25k
- Sensitivity dB SPL: 91
- Voice coil Ø mm (in.): 28 (1.1)
- Magnet: Neodymium
- Cone/Dome: Tetolon
What's in the box:
- Two MP 28.3 Dome tweeters (with 6" length of wire attached)
- 2 MPCX 2T.3 Crossovers
- 2 Flush mount trim rings
- 2 Flush mount clamps
- 2 Angled surface mount housings
- 2 Factory mounting brackets
- 2 Grilles (installed)
- Two 1" Screws
- Ten 3/4" Screws
- Two M3x12mm Machine screws
- 2 Flat washers
- 4 Speed clips
- 2 Adhesive backed pads
- Two 10" Zip ties
- Owner's manual (English/ Spanish/ French/ German/ Italian/ Portuguese/ 28 Others)
- Template on box
Accessories:
MPCX 2T.3 crossover
Separate ultra-compact crossover to the benefit of simplicity and flexibility of installation featuring level adjustment switch (0, -2dB).
Angle support
Support for wedge mounting.
Flush mounting ring
Watchband
| Price | £149.99 |
|---|---|
| Manufacturer | Hertz |
| Vehicle Manufacturer | None |
SEE OTHER PRODUCTS BY Hertz