HERTZ HP6001 - 600Watt 1-Channel D-Class Monoblock Car Amplifier

In order to deliver such extraordinarily high power, the power supply stage features 8 toroidal transformers, 22 - 3300 uF 105° Low ESR primary capacitors for a total of 72600uF, 16 - 130A TO247 Mosfets and 8 - 1500uF secondary capacitors capable of 200V.

The D-Class output stage features 12 - 240A/300V impulsive current Mosfets robust power and thermal dissipation without compromise.

4 power supply terminal blocks transfer power between the battery and the amplifier with very low contact resistance.
Inputs and outputs to cascade-connect a second amplifier, for high power SPL levels.

By-passable Lo-Pass filter, providing full system design flexibility with external processors.
Subsonic filter (24 dB – 25 Hz), removes very low subsonic frequencies from music signal to avoid damages to the subwoofer.
Continuously adjustable Phase control (0 to 180°); it increases bass alignment of woofer with sub.

Included Remote Volume Control (HRC); allows the user to adjust subwoofer level from dashboard.

Product Features

6000W MAX POWER MONO D-CLASS AMPLIFIER WITH CROSSOVER

• Output Power (RMS) @ 14.4 VDC, THD 1%:
• 1 Ch: 2150 W x 1 (4 Ω)
• 1 Ch: 3760 W x 1 (2 Ω)
• 1 Ch: 6000 W x 1 (1 Ω)
• Distortion - THD (100 Hz @ 4 Ω): 0.1 %
• Bandwidth (fi lter off): 10 ÷ 500 Hz
• S/N Ratio (A weighted @ 1 V): 86 dB
• Damping factor (100 Hz @ 4 Ω): 500
• Pre-In sensitivity: 0.3 ÷ 5 VRMS (15 k Ω)
• Load impedance (MIN): 1 Ω
• Filters On-Off: Yes
• Lo-Pass: 50 ÷ 400 Hz @ 24 dB/Oct.
• SUBSONIC (on/off): 25 Hz @ 24 dB/Oct.
• PHASE (adjust): (0 ÷ 180) deg
• Remote Volume Control (adjust): (-50 ÷ 6) dB
• Link Master-Slave: Yes