A fit for more vehicles
Thanks to a special 6-1/2" flat-profile woofer design, the Cento Series sound is a fit in more vehicles. The CK 165 F component speaker system employs a separate Tetolon® dome tweeter for detailed sound defined by a natural timbre and smooth transitions. The semi-pressed paper and mica powder woofer cone delivers your music's lower frequencies with accuracy and impact — and, at 1-3/4" deep, these woofers will fit in almost any vehicle. Superior damping is also key to the sound of these speakers — minimized resonance reduces distortion for Hertz's famous truer-to-life sound. The system's external, compact crossovers feature two tweeter levels that help you dial in the best sound in your vehicle.
The Hertz philosophy
Hertz believes that a good speaker should enhance the emotional power of the music you love. That's a high bar, but with their commitment to using premium components and boundary-pushing design, they're more than up to challenge. A community of music lovers, Hertz is committed to optimizing your car's sound system for total audio enjoyment.
Product Features:
C 26 Tweeter:
- Soft Tetolon® fiber 26 mm (1 in.) dome and 20 mm (0.8 in.) voice coil, for a natural and yet detailed reproduction of musical nuances.
- Neodymium magnet with high-density magnetic flux, optimized for maximum control during high-energy dynamic transients in the mid-high frequency range.
- Faceplate geometry optimized with FEM (Finite Element Modeling) technique for a linear frequency response in off-axis installations.
- Wide range of accessories, for easy integration in OEM placements.
C 165 F Woofer:
- Shallow profile for an easy replacement of factory speakers.
- Semi-Pressed Paper Cone reinforced with Mica powder for superior stiffness and smooth response.
- High-density flux ferrite magnet combined with low-carbon polar plates for reduced distortion at high power levels.
- The pure copper voice coil, wound on aluminium former, for very good thermal and mechanical capacity.
- Stylish grille designed combining metallic mesh and high resistance ABS frame.
CCX 2 Crossover:
- Tweeter level adjustment through a three-position switch (0, +3 dB) for an optimal tone balance that can be customized by the user.
- Low-loss factor capacitors and low resistance inductances made with pure copper, for maximum sound transparency and clear high frequencies.
- Compact design with a metallic finish for easy installation, with air vents for efficient heat dissipation.
Technical Specifications
Size Woofer Tweeter diaphragm |
mm (in.) mm (in.) |
165 (6.5) 26 (1) |
Voice Coil Ø Woofer Tweeter |
mm (in.) mm (in.) |
25 (1) 20 (0.8) |
Power Handling |
W peak W continuous |
270 9 |
Sensitivity | dB SPL | 93 |
Impedance | Ω | 4 |
Frequency Response | Hz | 65 ÷ 22.5k |
Crossover Type - Cut off | 2.5 kHz @ 12 dB Oct | |
Adjustment | Tweeter Level | 0 / +3dB |
Weight of one component Woofer Tweeter Crossover |
kg (lb) kg (lb) kg (lb) |
0.72 (1.59) 0.03 (0.07) 0.185 (0.41) |
What's in the box:
- Two C 165 F Woofers
- Two C 26 Dome tweeters (with attached 9" length of speaker wire)
- Two CCX 2 Crossover networks
- 2 Tweeter flush mount clamps
- 2 Angled surface mount housings
- 2 Woofer grilles
- Two M3x4.5mm Machine screws
- Eight 3/4" Screws (large head)
- Eight 3/4" Screws (small head)
- Four 5/8" Flat head screws
- 8 Large speed clips
- 4 Small speed clips
- Owner's manual (English/ Spanish/ French/ German/ Italian/ Portuguese/ 28 Others)
- Templates on box
Price | £199.99 |
---|---|
Manufacturer | Hertz |
Vehicle Manufacturer | None |