HELIX M ONE
Small, efficient and uncompromisingly stable – the M ONE is a highly compact monoblock for subwoofer applications. Designed from the latest Class D technology this tiny amp can easily control speakers with 1 Ohm impedance. Its current capability makes the M ONE a perfect partner for 2 x 2 Ohms subwoofers, where both voice coils are connected in parallel.
In addition, a comprehensive and stunningly practical feature set leaves nothing to be desired. Last but not least installation will be a no-brainer due to the minimal dimensions.
FEATURES
- Small footprint Class D amplifier with a high output power of 600 Watts RMS @ 1 Ohm for easiest combination with all 2 x 2 Ohms subwoofers connected in parallel
- Start-stop capability down to 6V supply voltage
- Smart high-level input with ADEP circuit (Advanced Diagnostics Error Protection) and Auto Turn-On function
- Integrated, active crossover with lowpass, bass boost, subsonic and phase control
- Extremely stable output stage with high-current power transistors and 1 Ohm stability
- Bass remote control for volume adjustment
- SMD (Surface Mounted Device) manufacturing technology combines minimum space requirements with maximum reliability
- Exclusive, extremely compact and clean design with illuminated HELIX-logo and low heat dissipation thanks to extraordinary efficiency
SMART HIGHLEVEL INPUT
The latest generation of OE car radios incorporates sophisticated possibilities of diagnosing the connected speakers. If a common amplifier will be hooked up failure messages and loss of specific features (e.g. fader function) quite often appear - but not with the M ONE.
The new ADEP circuit (Advanced Diagnostics Error Protection) avoids all these problems without loading the speaker outputs of the OE radio during high volumes unnecessarily.
START-STOP CAPABILITY
The switched power supply of the HELIX M ONE assures operation even if the battery’s voltage drops down to 6 Volts during engine crank.
Product Features:
- Start-stop capability down to 6V supply voltage
- Smart high-level input with ADEP circuit (Advanced Diagnostics Error Protection)
- Fully active crossover with subsonic, lowpass, bass boost with adjustable center frequency and phase
- Extremely stable output stage with high-current power transistors
- Cable remote control for volume adjustment
- “Input mode” switch for flexible input signal routing
- High-level input sensitivity up to 14 Volts max.
- SMD (Surface Mounted Device) manufacturing technology combines minimum space requirements with maximum reliability
- Exclusive compact and clean design with illuminated HELIX logo
Special Features:
Smart high level input
- The latest generation of OE car radios incorporates sophisticated possibilities of diagnosing the connected speakers. If a common amplifier will be hooked up failure messages and loss of specific features (e.g. fader function) quite often appear - but not with the G ONE.
- The new ADEP circuit (Advanced Diagnostics Error Protection) avoids all these problems without loading the speaker outputs of the OE radio during high volumes unnecessarily.
Start-Stop capability
- The switched power supply of the HELIX G ONE assures operation even if the battery’s voltage drops down to 6 Volts during engine crank.
- Output power RMS ≤ 1% THD+N
- @ 4 Ohms 1 x 240 Watts
- @ 2 Ohms 1 x 410 Watts
- @ 1 Ohm 1 x 600 Watts
- Max. output power per channel*: Up to 720 Watts RMS @ 1 Ohm
- Amplifier technology: Class D
- Inputs: 2 x RCA / Cinch, 2 x Highlevel speaker input, 1 x Remote In, 1 x Remote control input
- Input sensitivity: RCA / Cinch 0.5 - 6 Volts, Highlevel 1.1 - 13 Volts
- Input impedance RCA / Cinch: 20 kOhms
- Input impedance highlevel: 13 Ohms
- Outputs: 1 x Speaker output
- Frequency response: 10 Hz - 250 Hz
- Bass boost: 0 - 12 dB / 25 - 75 Hz
- Lowpass: 50 Hz - 250 Hz adjustable
- Bandpass: 10 Hz - 250 Hz adjustable
- Subsonic: 10 Hz - 50 Hz adjustable
- Phase: 0 - 180° adjustable
- Slope subsonic / lowpass: 12 / 24 dB/Oct.
- Signal-to-noise ratio analog input: 95 dB (A-weighted)
- Distortion (THD): 0.20 %
- Damping factor: 100
- Operating voltage: 10.5 - 16 Volts (max. 5 sec. down to 6 Volts)
- Idle current: 650 mA
- Fuse: 2 x 35 A Maxi-fuse (APX)
- Additional features: Active, adjustable crossover, bass boost, phase shift, Start-Stop capability, highlevel input with automatic turn on function and Advanced Diagnostics Error Protection (ADEP), bass volume cable remote control
- Dimensions (H x W x D): 50 x 230 x 154 mm / 2.00 x 9.06 x 6.06”
Price | £299.99 |
---|---|
Manufacturer | HELIX |
Vehicle Manufacturer | None |