Ford Transit Custom (MATT GREY/PHOENIX SILVER) Double DIN fitting kit (WITH TOP DISPLAY) FK-9261/1

Complete fitting kit to install a Double DIN aftermarket head unit into a Ford Transit Custom Euro 5 (2012 - September 2016) vehicles (with an original display above the radio)

 Compatibility Chart

This complete stereo upgrade fitting Kit includes:

Fakra to DIN antenna adapter cable (21-106)

Male Fakra to Male DIN antenna adapter cable. This cable adapts from a Farka antenna connection at the back of the cars original radio to a standard aftermarket DIN antenna connection to allow the fitting of an aftermarket radio upgrade. This is a passive adapter cable, not suitable for cars that need a phantom power supply to turn on the antenna amplifier.

Ford steering wheel audio control interface WITH ORIGINAL DISPLAY (29-CTF08)

CAN-Bus Steering Wheel Control Interface for Ford (2012 Onwards) vehicle models. Retains steering wheel controls, parking sensor audio and allows time/date change from the steering wheel.

Also maintains date, time & temperature display, OEM parking sensor audio with new  parking buzzer. Includes CAN ignition and speed pulse for Navigation systems

PLEASE NOTE: FOR TRANSIT RADIOS WITH THE DISPLAY ON TOP OF THE DASH

29-CT Series Universal Patch Lead (29-CT-025)

Universal patch lead for 29-CT series steering controls. Suitable for Alpine,  Clarion, JVC, Kenwood,  Pioneer, Sony and Chinese/ resistive programmable head-units that are steering wheel remote ready.

This cable plugs into the Steering wheel control box and into either the 3.5mm socket or single wire on the back of the head-units.

Ford Transit Custom (2014 Onwards) Double DIN fascia Grey (PHOENIX SILVER) (50-926/1)

Fascia kit to install a double din after market radio. This kit comes with side fix mounting brackets, no fitting cage is needed. Matt Grey colour, also called Phoenix Silver, usually found on the Base models.

COLOUR: MATT GREY/ PHOENIX SILVER

PLEASE NOTE: The fitting of this fascia requires plastics to be cut behind the dashboard, we recommend this is done be an experienced car audio technician. Extra install time needs to be allowed for to perform the modification.

Ford OEM passenger airbag light assembly (FORD-1799698)

Use when changing the radio in a Ford vehicle that has the original passenger airbag light built into the original radio.

If the van originally has an airbag status light on the radio the airbag light assembly (included in this kit) will be needed, this stops airbag warning lights appearing on the dashboard.

PLEASE NOTE

An additional OEM lock and hazard switch assembly (FORD-F1519127) may be required if the original can not be retained.

This kit is only for vehicles WITH an original display screen above the radio.