BLAM Relax 165TOY S 6.5" (165mm) Component Speakers for Toyota BL-165TOY-S

BLAM Relax 165TOY S 6.5" (165mm) Component Speakers for Toyota

The BLAM 165TOY S kit is designed for direct installation in Toyota vehicles using original speaker locations and connectors—no modifications needed. Ideal for enhancing mid- and high-frequency performance, the kit includes:

• Two 165 mm fiberglass-cone speakers with butyl surround, long-life Conex spider, 25 mm Kapton voice coil, and a 90 × 15 mm ferrite motor—all built into a moisture-resistant composite basket with a 5 mm magnetic circuit
• Two 25 mm soft‑dome tweeters with neodymium motors, Toyota-specific mounting plates, surface and flush mounting options, and integrated high-pass filters for level adjustment (0 dB/–3 dB) .
• Two independent 6 dB/octave high-pass filters to protect the tweeters and optimize sound balance.

With a maximum power handling of 120 W and a frequency range of 45 Hz–23 kHz, the kit delivers clean, detailed high and midrange reproduction while maintaining a low 2 Ω impedance and high efficiency (93.2 dB) .

Manufactured by BLAM in France, trusted globally by installers, and supplied in the UK by InCarTec—the official distributor—this kit offers a premium yet simple upgrade for Toyota drivers.

PLEASE NOTE: To ensure compatibility, we recommend that the parts pictured in our listing are compared to the actual parts in your vehicle before you make your purchase. If still unsure, please contact us via email system so we can advise before you make your purchase.

Key Features

• 165 mm (6.5″) fiberglass-cone speakers
• 25 mm soft-dome tweeters (neodymium)
• 60 W RMS / 120 W peak per speaker
• Frequency response: 45 Hz – 23 kHz
• Impedance: 2 Ω | Sensitivity: 93.2 dB
• Plug‑and‑play compatibility with Toyota wiring
• Independent high-pass filters (6 dB/oct) with level switch
• Moisture-resistant composite basket

Technical Specifications

• High-efficiency Plug & Play kit for Toyota 2 separate voices
• Maximum power 120 W – Nominal power 60 W
• Frequency response 45 Hz – 23 kHz
• Impedance 2 Ω – Sensitivity 93.2 dB
• This kit includes two 165 mm woofers, two 25 mm soft dome tweeters and two separate 6dB/octave high-pass filters.
• Special composite salad bowl
• Fiberglass membrane
• Peripheral butyl surround
• Spider long life ”Conex
• 25 mm coil on kapton support
• 90 x 15 mm ferrite motor (Y30)
• 5 mm magnetic circuit
• Plug & Play connector for Toyota
• 25 mm high-quality soft dome
• Neodymium motor
• Mounting plate tweeter toyota
• Separate 6dB/octave high-pass filter
• Tweeter level adjustable to 0 dB or attenuated to -3 dB