Audison SR6.600 - 6 Channel High Power Compact Amplifier with Crossover

SR 6.600 AMPLIFIER

1120 W TOTAL POWER | 140 W X 4 + 185 X 2 @2OHM | D-CLASS

SR AMPLIFIERS

At Audison, our commitment to delivering unparalleled sound quality and innovative in-car audio systems remains unwavering. We are thrilled to present our latest masterpiece – the Audison SR 6.600 6-Channel Amplifier with Hi-Res Audio Certification. This amplifier is engineered to redefine your in-car listening experience, setting a new standard in audio excellence.

AUDISON D-CLASS TECHNOLOGY

ADT uses a switching frequency twice as fast as many other modern Class D amplifiers using very high-tolerance component parts to keep the timing correct even during temperature extremes. The higher switching frequency of Audison Class D moves noise much farther away from the audible band. Audison Class D amplifiers also use a steeper 4th-order analog lowpass filter, rather than the simpler 2nd-order lowpass filters usually used in competing designs. The steeper filter will keep noise much lower in amplitude – which is good for controlling EMI and preventing infrasonic noise from getting to the tweeters. It also keeps phase shift outside the audible range. The cost is higher – twice as many components are needed for a 4th-order filter compared to the usual 2nd-order filter, and each output channel needs its own filter – but Audison determined through exhaustive listening testing that this design was the best-sounding approach.

• High-current capability delivers high power into the most difficult loads (1Ω Stereo, 2Ω Bridged, for 5/6)
• Staggered power optimized for a 3-way active front with higher power for woofers, or 600W of bridged power for a sub 5 ch output operation mode to create a five-channel system, with 2Ω subwoofer
• Flexible crossover filter networks deliver Active 3-way, Front/Rear/Sub, or six channels of high-passed power
• ADT (Audison D-Class) Technology 2Ω stable output providing Hi-Res certified audio performance with superior efficiency in a compact size.
• Extruded aluminum compact design with a fanless convection cooling system
• Built-in USS (Universal Speakers Simulator)
• Balanced high-noise rejection inputs for Speaker-In (for OEM head units) and RCA-In (for Aftermarket head units).
• ART (Automatic Remote Turn-On/Off) automatically turns on/off the amplifier when the OEM head-unit turns on/off (can be enabled/disabled, with Speaker-In inputs)
• Accepts up to 40-volt input signal (Speaker-In)
• Bass Boost(50 Hz) adjustable up to 12 dB, to increase the subwoofer punch
• Lo-Pass and Hi-Pass 12 dB adjustable (50 Hz to 5000 Hz) filters, providing the ability to build a 3-way system, a front 2-way + rear system, or a front 2-way + one powerful subwoofer (2Ω)
• Optional VCR-S2/ARC 01 Remote Volume Control provides the ability to adjust the OUT 5/6
• volume level from the dashboard

USS

Universal Speaker Simulator technology on high-level inputs for maximum compatibility with any type of Head-Unit OEM Source.

HI-RES

According to the definition of Hi-Res audio provided by JAS (Japan Audio Society), this amplifier exceeds the above 40 kHz bandwidth analog requirement.

FULLY BRIDGEABLE

Maximum versatility thanks to the bridging option for each pair of channels.

Product Features:

• Channels 6
• Class D-Class
• Efficiency >87%
• Hi-Level Input Yes
• Low-Level Input Yes
• Digital Input No
• Power supply voltage/fuse 11 ÷ 17 VDC
• Operating power supply voltage 11 ÷ 17 VDC / 2 x 30A
• Idling current 2.2 A
• Idling current when off 0.04 mA
• Consumption @ 14.4 VDC, 2Ω, Max Musical Power  54 A
• Remote OUT 4 ÷ 15 VDC (150 mA)
• Remote IN 4 ÷ 15 VDC (1 mA)
• ART - Automatic Remote Turn on/off from OUTPUT BTL speakers (Selectable) 1.5 ÷ 7 VDC

AMPLIFIER STAGE

• Distortion - THD @ 100 Hz, 4Ω, 70% Rated Power 0.05 %
• Bandwidth A 10Hz ÷ 42 kHz
• S/N ratio A 102 dBA
• Damping factor A Ch/B Ch 100 / C Ch 400
• Input sensitivity Pre-In 0.32 ÷ 8 VRMS
• Pre In Impedance >10 kOhm
• Input sensitivity Speaker-In 1.6 ÷ 40 VRMS
• Input impedance Speaker-In 3Ohm ÷ 100kOhm (it depends by the Polyfuse specifications)
• Total Power RMS 1120 W
• Minimum load impedance Ch 1-4: 2Ω / Ch 5-6: 1Ω / 1+2/3+4 Bridged: 4Ω / 5+6 Bridged: 2Ω
• Output Power (RMS) @14.4 VDC, 1% THD    

6Ch mode

• @4Ω: 85 x 4 + 110 x 2
• @2Ω: 140 x 4 + 185 x 2
• Ch1-4 @2Ω, Ch5-6 @1Ω: 140 x 4 + 300 x 2

5Ch mode

• @4Ω: 85 x 4 + 370 x 1 (Ch5/6 bridged)
• @2Ω: 130 x 4 + 600 x 1 (Ch5/6 bridged)

4Ch mode

• @4Ω: 280 x 2 (bridged) + 110 x 2
• @2Ω: 130 x 2 + 260 x 1 + 600 x 1

3Ch mode

• @4Ω: 280 x 2 + 370 x 1 (Ch5/6 bridged)
• 280 x 2 (Ch1-4 @4Ω) + 600 x 1 (Ch5/6 bridged @2Ω)
• Adjustable Crossover Yes

CEA SPECIFICATIONS

• Output power @ 4Ω, 1% THD+N, 14.4 V 75 W x 4 Ch + 85 W x 2 Ch
• SN ratio (ref. 1W output) A Ch, B Ch: 84 dBA, C Ch: 84 dBA

INPUTS

• Input Type Pre-In / Speaker-In
• Filter Pass A Full
• Hi-pass: 50 ÷ 500 Hz @ 12 dB/Oct.
• Filter Pass B Full
• Hi-pass: 50 ÷ 500 Hz @ 12 dB/Oct
• Band-pass: 50 ÷ 700 Hz (Hi) / 50 ÷ 5 kHz (Lo) @ 12 dB/Oct
• Filter Pass C Full
• Hi-pass: 50 ÷ 700 Hz @ 12 dB/Oct
• Lo-pass: 50 ÷ 700 Hz @ 12 dB/Oct
• Inputs/Outputs Sub CH -
• Inputs/Outputs Phase  No
• Inputs/Outputs Bass Boost No
• Inputs/Outputs Subsonic No
• Remote Sub Volume (-20 ÷ 6) dB

OTHER

• Weight 2.52 kg